代码 14014: [Channel %1: ] Selected program %3 not available or will be edited
问题描述与安全警告
Siemens SINUMERIK 840D CNC 触发了严重的 [Channel %1: ] Selected program %3 not available or will be edited 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Parameters: %1 = Channel number %2 = Block number, label %3 = Program name Definitions: The selected parts program is not in the NCK memory or the access authorization for the program selection is from a higher level than the current control status. During creation, this program received the protection level of the NC control which was active at the time. In SW 5 or higher a program edited on HMI can no longer be started with NC Start. The alarm will also be issued, if a file other than th e specified definition file has been selected for the GUD or macro definition. Reaction: Alarm display. Remedy: Reload the program in the NCK memory or check an d correct the name of the directory (workpiece overview) and the program (program overview) and reselect. Program Continuation: Clear alarm with the Delete key or NC START.
Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Siemens SINUMERIK 840D CNC 警报
由 Siemens 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 SINUMERIK 840D CNC 出现类似 14014 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 4014 Siemens SINUMERIK 840D CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 14014.
Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026