Código 14096: [Channel %1: ] Block %2 illegal type conversion

Parameters: %1 = Channel number %2 = Block number, label Diagnostics Manual (DAsl), 03/2009 Definitions: During the program run, a variable value assignmen t or an arithmetic operation has caused data to be processed in such a way that they have to be converted to another type. This would lead to the value range being exceeded. Value ranges of the various variable types: - REAL: Property: Fractional number with dec. pt., value range: +/-(2-1022-2+1023) - INT: Property: Integers with signs, value range: +/-(231-1) - BOOL: Property: Truth value TRUE, FALSE, value range: 0,1 - CHAR: Property: 1 ASCII character, value range: 0-255 - STRING: Property: Character string (max. 100 values), value range: 0-255 - AXIS: Property: Axis addresses, value range: Axis names only - FRAME: Property: Geometric informat ion, value range: As for axis paths Overview of type conversions: - from REAL to: REAL: yes, INT: yes*, BOOL: yes1), CHAR: yes*, STRING: -, AXIS: -, FRAME: - from INT to: REAL: yes, INT: yes, BOOL: yes1), CHAR: if value 0...255, STRING: -, AXIS: -, FRAME: - from BOOL to: REAL: yes, INT: yes, BOOL: ye s, CHAR: yes, STRING: -, AXIS: -, FRAME: - from CHAR to: REAL: yes, INT: yes, BOOL: yes1), CHAR: yes, STRING: yes, AXIS: -, FRAME: - from STRING to: REAL: -, INT: -, BOOL: yes2), CHAR: only if 1 character, STRING: yes, AXIS: -, FRAME: - from AXIS to: REAL: -, INT: -, BOOL: -, CHAR: -, STRING: -, AXIS: yes, FRAME: - from FRAME to: REAL: -, INT: -, BOOL: -, CHAR: -, STRING: -, AXIS: -, FRAME: yes 1) Value <> 0 corresponds to TRUE, value ==0 corresponds to FALSE. 2) String length 0 => FALSE, otherwise TRUE. 3) If only 1 character. It is not possible to convert from type AX IS and FRAME nor into type AXIS and FRAME. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Modify the program section such that the value range is not exceeded, e.g. by a modified variable definition. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.