Código 14210: [Channel %1: ] Block %2 polar angle too large

Parameters: %1 = Channel number %2 = Block number, label Definitions: In specifying the endpoints in a traversing block with G00, G01, G02 or G03 in polar coordinates, the value range of the polar angle programmed under t he keyword AP=... has been exceeded. It covers the range from -360 to +360 degrees with a resolution of 0.001 degrees. Definition of terms: - Specification of end of block point with polar angle and polar radius, referring to the current pole (preparatory functions: G00/G01/G02/G03). - New definition of the pole with polar angle and pole radius, referring to the reference point selected with the G function. G110... referred to the last programmed point in the plane, G111... referred to the zero point of the current workpiece coordinat e system (WCS), G112... referred to the last pole. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Correct NC part program. The permissible input r ange for the polar angle is between the values -360 degrees and +360 degrees with a resolution of 0.001 degrees. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.