代码 14822: [Channel %1: ] Block %2 incorrect programming of GWPS

Parameters: %1 = Channel number %2 = Block number, label Definitions: When selecting GWPS (constant grinding wheel per ipheral speed) with GWPSON or programming the GWPS with "S[spindle number] = value" one of the following errors has occurred: Invalid spindle number. Invalid parameter number for radius calculation in $TC_TPG9. The following values are valid: 3 for $TC_DP3 (length 1) 4 for $TC_DP4 (length 2) 5 for $TC_DP5 (length 3) 6 for $TC_DP6 (radius) Invalid angle in $TC_TPG8. The following values are valid: -90 <= $TC_TPG8 < +90. A grinding wheel radius equal to zero was specified. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Check tool compensation data. - $TC_DP1: 400 - 499. - $TC_TPG1: Spindle number. - $TC_TPG8: Inclination angl e for slope grinding wheel. - $TC_TPG9: Compensation parameters for radius computation, e.g. 3 for $TC_GP3. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.