代码 15122: Power ON after power failure: %1 data were restored, of which %2 machine data, %3 errors.

Parameters: %1 = Number of data %2 = Number of machine data %3 = Number of errors occurred Definitions: Notification alarm. The alarm has no negative effect as long as %3 the number of errors occurred is zero. %1 indicates the number of elementary and complex data restoring steps which were taken after a power OFF during power ON orduring a power failure to restore the persistent NCK data. %2 indicates the number of restored machine data. If the value is larger than zero, another warm restart (NCK reset) may be necessary to make the - possibly configuring - ma chine data changes prior to the power failure effective. %3 indicates the number of errors occurred during data restoring. Reaction: Alarm display. Remedy: As long as %3 number of errors occurred is zero, the alarm is only informative. As long as %3 number of errors occurred is larger than zero, the alarm indicates a software error. Further machining with the data is not recommended. Please load a suitable archive file before co ntinuing machining to avoid subsequent problems. Please inform the authorized personnel/service department. File /_N_MPF_DIR/_N_SIEMDIAGMEMPF_MPF cont ains information that may help Siemens for error diagnosis. Program Continuation: Clear alarm with the RESET key. Restart part program