代码 15177: [Channel %1: ] Block %2 Error on preprocessing of program %3, error code: %4

Parameters: %1 = Channel number %2 = Block number, label %3 = File name %4 = Error code Definitions: If an encrypted program is loaded to the NCK, an NCK reset (restart) must be performed afterwards, because internal data for efficient processing of the encrypted program are preprocessed during NCK power-up. The following problem has occurred: Error code 1: Error on read-in of program %4 Error code 2: There is not enough DRAM memory available for storing the preprocessed data. Reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: Error code 1: Encrypt and load program %4 again. Then perform an NCK reset (restart). Error code 2: Increase system SL 710-740, 802D, 828D: $MN_MM_T_FILE_MEM_SIZE. Increase system SL 840 DI: $MN_MM_DRAM_FILE_MEM_SIZE. Then perform an NCK reset (restart). Program Continuation: Clear alarm with the RESET key. Restart part program