代碼 16746: [Channel %1: ] Block %2 spindle %3 selected gear stage %4 not installed

Parameters: %1 = Channel number %2 = Block number, label %3 = Spindle number %4 = Gear stage Definitions: The first gear stage data block is active. The requ ired gear stage is not installed in the 1st gear stage data block. The number of gear stages installed is configured in MD35090 $MA_NUM_GEAR_STEPS. Examples of the occurrence of the alarm with 3 three gear stages installed (MD 35090 $MA_NUM_GEAR_STEPS = 3): *... M44 or M45 has been programmed for the spindle concerned *...M70 has been programmed and MD35014 $MA_GEAR_STEP_USED_IN_AXISMODE is larger than 3. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Modify part program: Only those valid gear stages can be entered which have also been installed according to MD35090 $MA_NUM_GEAR_STEPS. Limit M70 configuration (MD 35014 $MA_GEAR_STEP_USED_IN_AXISMODE) to MD35090 $MA_NUM_GEAR_STEPS. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program. Diagnostics Manual (DAsl), 03/2009