代碼 16747: [Channel %1: ] Block %2 spindle %3 inserted gear stage %4 for tapping not installed

Parameters: %1 = Channel number %2 = Block number, label %3 = Spindle number %4 = Gear stage Definitions: The second gear stage data block has been activated for tapping with G331. However, the current gear stage has not been installed in the second gear stage data block. The number of gear stages installed is configur ed in MD35092 $MA_NUM_GEAR_STEPS2. The gear stage cannot be changed in traversing blocks. The gear stage appropriate for the speed must be loaded before the traversing block. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Procedure for automatically engaging the suitable gear stage prior to thread cutting: * Program the spindle speed (S) in a G331 block wit hout axis motions and prior to thread cutting, e.g. G331 S1000. * Activate M40 for the spindle. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.