Código 17050: [Channel %1: ] Block %2 illegal value

Parameters: %1 = Channel number %2 = Block number, label Definitions: A value has been programmed that exceeds the value range or the limit value of a variable or a machine data. Example: - in a string variable (e.g. GUD or LUD) a string shall be written that exceeds the string length agreed upon in the variable definition. - if an invalid value is to be written in a tool or magazine management variable ( e.g. invalid cutting edge number in $TC_DPCE[x,y] or invalid m agazine location number in $TC_MDP2[x,y]). - an invalid value is to be written in $P_USEKT or $A_DPB_OUT[x,y]. - an invalid value is to be written in a machine data (e.g. MD10010 $MN_ASSIGN_CHAN_TO_MODE_GROUP[0] = 0). - on accessing an individual frame elemen t, a frame component other than TRANS, ROT, SCALE or MIRROR was addressed or the function CSCA LE has been given a negative scale factor. Reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: Address frame components only with the keywords provided; program the scale factor between the limits of 0.000 01 to 999.999 99. Program Continuation: Clear alarm with the RESET key. Restart part program