Code 17202: [Channel %1: ] Block %2 deleting magazine data not possible

Parameters: %1 = Channel number %2 = Block number, label Definitions: An attempt was made to delete magazine data which cannot currently be deleted. A magazine with the 'tool in motion' status active cannot be deleted. A tool adapter which is currently allocated to a magazine location cannot be deleted. A tool adapter cannot be deleted if MD18104 $MN_MM_NUM_TOOL_ADAPTER has the value -1. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: If an attempt to delete a magazine fails $TC_MAP1[ m ] = 0; Delete magazine with m=magazine no. $TC_MAP1[ 0 ] = 0; Delete all magazines $TC_MAP6[ m ] = 0; Delete magazines and all thei r tools you must ensure that the magazine does not have the 'tool in motion' status at the time of the call. If an attempt to delete a tool adapter fails $TC_ADPTT[ a ] = -1; Delete adapter with number a $TC_ADPTT[ 0 ] = -1; Delete all adapters then the data association with the magazine loca tion or locations must first be canceled with $TC_MPP7[ m,p ] = 0; m = magazine no., p = no. of the location to which the adapter is assigned. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.