代碼 17500: [Channel %1: ] Block %2 axis %3 is not an indexing axis

Parameters: %1 = Channel number %2 = Block number, label %3 = Axis name, spindle number Definitions: An indexing axis position has been programmed for an axis with the keywords CIC, CAC or CDC that has not been defined as indexi ng axis in the machine data. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Please inform the authorized personnel/service department. Remove programming instruction for indexing axis positions (CIC, CAC, CDC) from the NC part program or declare the relevant axis to be an indexing axis. Indexing axis declaration: Modify MD30500: $MA_INDEX_AX_ASSIGN_POS _TAB (indexing axis assignment) The axis will become an indexing ax is when an assignment to an indexing position table was made in the stated MD. 2 tables are possible (input value 1 or 2). Modify MD10900 $MN_INDEX_AX_LENGTH_POS_TAB_1 Modify MD10920 $MN_INDEX_AX_LENGTH_POS_TAB_2 (Number of positions for 1st/2nd indexing axis) Standard value: 0 Maximum value: 60 Modify MD10910 $MN_INDEX_AX_POS_TAB_1 [n] Modify MD10930 $MN_INDEX_AX_POS_TAB_2 [n] (Positions of the 1st indexing axis ) The absolute axis positions are entered. (The list length is defined via MD10900 $MN_INDEX_AX_LENGTH_POS_TAB_1). Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.