代碼 17510: [Channel %1: ] Block %2 invalid index for indexing axis %3

Parameters: %1 = Channel number %2 = Block number, label %3 = Axis name, spindle number Definitions: The programmed index for the indexing ax is is beyond the position table range. Example: Perform an absolute approach of the 56th position in the list allocated via the axis-specific MD30500 $MA_INDEX_AX_ASSIGN_POS_TAB with the 1st positi oning axis, the number of positions is e.g. only 40 (MD10900 $MN_INDEX_AX_LENGTH_POS_TAB_1 = 40). N100 G.. U=CAC (56) Or, with equidistant distances, the pr ogrammed index is smaller or equal 0. Or, an attempt is made with a MOV movement to travel to a position outside the permitted area. Reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: Program the indexing axis position in the NC part progr am in accordance with the length of the current position table, or add the required value to the position table and adjust the length of the list. Diagnostics Manual (DAsl), 03/2009 Program Continuation: Clear alarm with the RESET key. Restart part program