Código 2000: PLC sign-of-life monitoring

Definitions: The PLC must give a sign of life within a defined period of time (MD10100 $MN_PLC_CYCLIC_TIMEOUT). If this does not occur, the alarm is triggered. The sign of life is a counter reading on the internal NC/PLC interface which the PLC causes to count up with the 10 ms time alarm. The NCK also test s cyclically whether the counter reading has changed. Reaction: NC not ready. Local alarm reaction. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: Please inform the authorized personnel/service department. Check monitoring time frame in MD10100 $MN_PLC_CYCLIC_TIMEOUT (reference value: 100ms). Establish the cause of the error in the PLC and elim inate it (analysis of the ISTACK. If monitoring has responded with a loop in the user program rather than with a PLC Stop, there is no ISTACK entry). Program Continuation: Switch control OFF - ON.