Código 20065: [Channel %1: ] Master spindle not defined for geometry axes in JOG mode

Parameters: %1 = Channel number Definitions: The displayed axis is to be trav ersed as geometry axis in JOG mode with rotary feed, but no master spindle has been defined from whic h the actual speed could be derived. Reaction: Local alarm reaction. Interface signals are set. Alarm display. Remedy: If the revolutional feedrate is to be active in JOG mode too, then a master spindle must be declared in the channel-specific machine data MD20090 $MC_SPIND_DEF_MASTER_SPIND. In this case, you have to open a screen in the PARAMETER ope rating area with the softkeys "SETTINGDATA" and "JOG DATA", and preselect the G function G 95 there. The JOG feedrate can then be entered in [mm/rev]. (If 0 mm/rev is set as JOG feedrate, the c ontrol takes the value assigned in the axis-specific machine data MD32050 $MA_JOG_REV_VELO or in t he case of rapid traverse override MD32040 $MA_JOG_REV_VELO_RAPID). The revolutional feedrate in JO G mode is deactivated by changing t he G function from G95 to G94. Program Continuation: Clear alarm with the Delete key or NC START.