代码 201030: <location>Sign-of-life failure for master control

Message value: Drive object: A_INF, B_INF, S_INF, SERVO, TM41, VECTOR Reaction: A_INFEED: OFF1 (NONE, OFF2) SERVO: OFF3 (ENCODER, IASC/DCBRAKE, NONE, OFF1, OFF2, STOP1, STOP2) VECTOR: OFF3 (ENCODER, IASC/DCBRAKE, NONE, OFF1, OFF2, STOP1, STOP2) Acknowledge: IMMEDIATELY Cause: For active PC master control, no sign-of-life was received within the monitoring time. The master control was returned to the active BICO interconnection. Remedy: Set the monitoring time higher at the PC or, if r equired, completely disable the monitoring function. For the commissioning software, the monitoring time is set as follows: <Drive> -> Commissioning -> Control panel -> Button "F etch master control" -> A window is displayed to set the monitoring time in milliseconds. Notice: The monitoring time should be set as short as possibl e. A long monitoring time means a late response when the communication fails! SINAMICS-Alarms