代碼 201036: <location>ACX: Parameter back-up file missing

Message value: %1 Drive object: All objects Reaction: A_INFEED: NONE (OFF2) SERVO: NONE (OFF1, OFF2, OFF3) VECTOR: NONE (OFF1, OFF2, OFF3) Acknowledge: IMMEDIATELY Cause: When downloading the device parameterization, a par ameter back-up file asso ciated with a drive object cannot be found. Neither a PSxxxyyy.ACX, a PSxxxyyy.NEW nor a PSxxxyyy.BAK parameter back-up file exists on the CompactFlash card for this drive object. Fault value (r0949, interpret hexadecimal): Byte 1: yyy in the file name PSxxxyyy.ACX yyy = 000 --> consistency back-up file yyy = 001... 062 --> drive object number yyy = 099 --> PROFIBUS parameter back-up file Byte 2, 3, 4: Only for internal Siemens troubleshooting. Remedy: If you have saved the project data using the commiss ioning software, carry out a new download for your project. Save using the function "Copy RAM to ROM" or with p0977 = 1 so that all of the parameter files are again completely written to the CompactFlash card. If you have not saved the project data, then first commissioning of the system has to be carried out again.