代碼 201037: <location>ACX: Re-naming the parameter back-up file unsuccessful

Message value: %1 Drive object: All objects Reaction: A_INFEED: NONE (OFF2) SERVO: NONE (OFF1, OFF2, OFF3) VECTOR: NONE (OFF1, OFF2, OFF3) Acknowledge: IMMEDIATELY Cause: Re-naming after saving a parameter back-up file on the CompactFlash card or in the volatile memory was unsuccessful. One of the parameter back-up files to be re-nam ed had the "read only" attribute. The parameter backup files are saved on the CompactFlash card in the directory \USER\SINAMICS\DATA. It is possible that the CompactFlash card is defective. Fault value (r0949, interpret hexadecimal): Byte 1: yyy in the file names PSxxxyyy.* or CAxxxyyy.* or CCxxxyyy.* yyy = 000 --> consistency back-up file yyy = 099 --> PROFIBUS parameter back-up file PSxxx099.* Byte 2: xxx in t he file name PSxxxyyy.* xxx = 000 --> data save started with p0977 = 1 xxx = 010 --> data save started with p0977 = 10 xxx = 011 --> data save started with p0977 = 11 xxx = 012 --> data save started with p0977 = 12 Byte 4, 3: Only for internal Siemens troubleshooting. Remedy: - check whether one of the files to be overwritten has the attribute "read only" and change this file attribute to "writable". Check all of the files (PSx xxyyy.*, CCxxxyyy.*, CAxxxyyy.*) that belong to drive yyy designated in the fault value. - replace the CompactFlash card.