代码 207514: <location>Drive: Data structure does not correspond to the interface module
问题描述与安全警告
Siemens SINUMERIK 840D CNC 触发了严重的 <location>Drive: Data structure does not correspond to the interface module 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Message value: Drive object: SERVO, TM41, VECTOR Reaction: NONE Acknowledge: NONE Cause: The interface mode "SIMODRIVE 611 universal" was set (p2038 = 1) and the data structure does not correspond to this mode. For the data structure, the following rule must be complied with. Within the group of 8 drive data sets, the assignment to the motor data set must be set the same: p0186[0] = p0186[1] =... = p0186[7] p0186[8] = p0186[9] =... = p0186[15] p0186[16] = p0186[17] =... = p0186[23] p0186[24] = p0186[25] =... = p0186[31] See also: p0180, p0186, p2038 Remedy: - structure the data according to the rules of the "SIMODRIVE 611 universal" interface mode. - check the interface mode (p2038).
Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Siemens SINUMERIK 840D CNC 警报
由 Siemens 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 SINUMERIK 840D CNC 出现类似 207514 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 4014 Siemens SINUMERIK 840D CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 207514.
Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026