代码 207579: <location>Encoder 3: Measuring probe evaluation not possible

Message value: %1 Drive object: SERVO, VECTOR Reaction: NONE Acknowledge: NONE Cause: When evaluating the measuring probe, an error occurred. Alarm value (r2124, interpret decimal): 6: The input terminal for the measuring probe is not set. 4098: Error when initializing the measuring probe. 4100: The measuring pulse frequency is too high. 4200: The PROFIBUS clock cycle is not a multiple of integer of the position controller clock cycle. SINAMICS-Alarms Remedy: De-activate the measuring probe evaluation (BI: p2509 = 0 signal). Re alarm value = 6: Set the input terminal for the measuring probe (p0488, p0489 or p2517, p2518). Re alarm value = 4098: Check the Control Unit hardware. Re alarm value = 4100: Reduce the frequency of the measur ing pulses at the measuring probe. Re alarm value = 4200: Set the clock cycle ratio between the PROFIBUS clo ck cycle and the position controller clock cycle to an integer multiple.