Código 21702: [Channel %1: ] Block %3 axis %2 measurement aborted

Parameters: %1 = Channel number %2 = Axis name, spindle number %3 = Block number Definitions: The measurement block has ended (the programmed end position of the axis has been reached) but the activated touch probe has not yet responded. Measurement level 2 (MEAWA, MEASA, MEAC) Measured values cannot be converted to the workpi ece coordinate system. The measured values of the GEO axes programmed in the measurement task are only available in the machine coordinate system. Causes: Not all GEO axes were programmed in the measur ement task. At least one measured value is therefore missing for conversion back in to the workpiece coordinate system. Further causes: The measurement tasks programmed fo r all GEO axis are not identical. Reaction: Alarm display. Remedy: Verify the traversing movement in the measurements block. - Is it necessary in all cases for the activated pr obe to have switched up to t he specified ax is position? - Are the probe, cable, cable distribut or, terminal connections in good order? Either program all GEO axes expl icitly or program the traversing movement with the POS[axis] command. Program Continuation: Clear alarm with the Delete key or NC START.