代码 22005: [Channel %1: ] Spindle %2 selected gear stage %3 not installed

Parameters: %1 = Channel number %2 = Spindle number %3 = Gear stage Definitions: The first gear stage data block is active. The requ ired gear stage is not installed in the 1st gear stage data block. The number of installed gear stages is configured in MD35090 $MA_NUM_GEAR_STEPS. Examples for the occurrence of the alar m with 3 gear stages installed (MD35090 $MA_NUM_GEAR_STEPS = 3): *...DO M44 or DO 45 was programmed in syn chronized action for the spindle concerned. *...DO M70 was programmed and MD35014 $MA_GEAR_STEP_USED_IN_AXISMODE was larger than 3. Reaction: NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: Modify part program: Only those valid gear stages can be entered which have also been installed according to MD35090 $MA_NUM_GEAR_STEPS. Limit M70 configuration (MD 35014 $MA_GEAR_STEP_USED_IN_AXISMODE) to MD35090 $MA_NUM_GEAR_STEPS. Program Continuation: Clear alarm with the RESET key. Restart part program