代碼 22069: [Channel %1: ] Block %2 tool management: No tool available in tool group %3, program %4

Parameters: %1 = Channel number %2 = Block number, label %3 = String (identifier) %4 = Program name Definitions: The specified tool group does not contain a tool wh ich is ready for use and could be used for tool change. It is possible that all of the tools in question have been set to the 'Disabled' state by the tool monitoring function. Parameter %4 = program name fa cilitates the identification of the program containing the programming command (tool selection) t hat caused the error. This can be a subprogram or cycle, etc., which can no longer be identified from the display. If the parameter is not specified, it is the currently displayed program. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: - Ensure that the specified tool group contains a tool that is ready for use when tool change is requested. - This can be achieved, for exampl e, by replacing disabled tools, or - by releasing a dis abled tool manually. - Check whether the tool data are correctly defined. Have all intended tools in the group been defined with the specified identifier and loaded? Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.