代码 22290: [Channel %1: ] Spindle operation for transformed spindle/axis %2 not possible (reason: error code %3).

Parameters: %1 = Channel number %2 = Axis name, spindle number %3 = Error code Definitions: It is impermissible to start a spindl e as long as it is being used by a transformation. Reason: spindle usage in a transformation requires axis operation, which must not be exited. This alarm may have the following reasons: - Error code 1: M3, M4 or M5 per synchronized action; - Error code 2: M41 through M45 per synchronized action; - Error code 3: SPOS, M19 per synchronized action; - Error code 11: DB31,... DBX30.0 (Spindle stop); - Error code 12: DB31,... DBX30.1 (Spindle start clockwise rotation); - Error code 13: DB31,... DBX30.2 (S pindle start counter clockwise rotation; - Error code 14: DB31,... DBX30.4 (Spindle positioning). Reaction: NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: Resolve the conflict, for exam ple by deactivating transformation prior to spindle start. Program Continuation: Clear alarm with the Delete key or NC START.