Código 230600: <location>SI MM: STOP A initiated

Message value: %1 Drive object: All objects Reaction: OFF2 Acknowledge: IMMEDIATELY (POWER ON) SINAMICS-Alarms Cause: The drive-based "Safety Integrated" function in the Motor Module (MM) has detected a fault and initiated STOP A (pulse suppression via the safety shutdown path of the Motor Module). - forced checking procedure of the safety s hutdown path of the Motor Module unsuccessful. - subsequent response to fault F30611 (defect in a monitoring channel). Fault value (r0949, interpret decimal): 0: Stop request from the Control Unit. 1005: Pulses suppressed although STO not sele cted and there is no internal STOP A present. 1010: Pulses enabled although STO is selected or an internal STOP A is present. 1020: Internal software error in the "Internal volt age protection" function. The "Internal voltage protection" function is withdrawn. A STOP A that cannot be acknowledged is initiated. 9999: Subsequent response to fault F30611. Remedy: - select Safe Torque Off and de-select again. - replace the Motor Module involved. Re fault value = 1020: - carry out a POWER ON (power off/on) for all components. - upgrade the Motor Module software. - replace the Motor Module. Re fault value = 9999: - carry out diagnostics for fault F30611. Note: CU: Control Unit MM: Motor Module SI: Safety Integrated STO: Safe Torque Off / SH: Safe standstill