代码 235220: <location>TM: Frequency limit reached for signal output

Message value: Drive object: All objects Reaction: A_INFEED: OFF1 (NONE, OFF2) SERVO: OFF1 (NONE, OFF2, OFF3) VECTOR: OFF1 (NONE, OFF2, OFF3) Acknowledge: IMMEDIATELY (POWER ON) Cause: The signals output from the Terminal Module 41 (T M41) for tracks A/B have reached the limit frequency. The output signals are no longer in synchronism with the specified setpoint. SINAMICS-Alarms Diagnostics Manual (DAsl), 03/2009 Remedy: SIMOTION (p4400 = 0) operating mode: - enter a lower speed setpoint (p1155). - reduce the encoder pulse number (p0408). - if the TM41 is configured as te chnology object in SIMOTION, then this fault is generated if the A/B signals in connector X520 are short-circui ted SINAMICS (p4400 = 1) operating mode: - the fine resolution of TM41 in p0418 does not match that of the connector input that was interconnected at P4420 - the encoder position actual value r0479 interconnec ted at connector input p4420 has an excessively high actual speed