代碼 25110: Axis %1 selected encoder not available
問題描述與安全警告
Siemens SINUMERIK 840D CNC 觸發了嚴重的 Axis %1 selected encoder not available 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Parameters: %1 = Axis name, spindle number Definitions: The selected encoder does not correspond to the ma ximum number of encoders in the axis-specific MD30200 $MA_NUM_ENCS, i.e. the 2nd encoder does not exist. Reaction: Alarm display. Remedy: Please inform the authorized personnel/service d epartment. Enter the number of actual value encoders used for this axis in the MD30200 $MA_NUM_ENCS ("Number of encoders"). Input value 0: Axis without encoder -> e.g. spindle Input value 1: Axis with encoder -> default setting Input value 2: Axis with 2 encoders -> e.g. direct and indirect measuring system Program Continuation: Clear alarm with the Delete key or NC START.
Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Siemens SINUMERIK 840D CNC 警報
由 Siemens 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 SINUMERIK 840D CNC 出現類似 25110 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 4014 Siemens SINUMERIK 840D CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 25110.
Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026