代码 4030: [Channel %1: ] Identifier missing in machine date %2[%3]

Parameters: %1 = Channel number %2 = String: MD identifier %3 = Index: MD array index Definitions: An axis identifier is expected for the displayed MD in accordance with the ax is configuration in the MD20070 $MC_AXCONF_MACHAX_USED and MD20050 $MC_AXCONF_GEOAX_ASSIGN_TAB. Diagnostics Manual (DAsl), 03/2009 Reaction: NC not ready. Mode group not ready, also effective for single axes NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: Please inform the authorized personnel/service department. Check axis configuration and enter the missing identifier into the MD or, should the axis not exist, specify for this channel axis the mach ine axis 0 in the channel-specific MD20070 $MC_AXCONF_MACHAX_USED. If this concerns a geom etry axis that is not to be used (this applies only for 2-axis machining, e.g. on lathes), then channe l axis 0 must be entered additionally in the channel-specific MD20050 $MC_AXCONF_GEOAX_ASSIGN_TAB. Program Continuation: Switch control OFF - ON.