代碼 6421: [Channel %1: ] Tool move not possibl e. Empty location for tool %2 on magazine %4 not available.

Parameters: %1 = Channel ID %2 = String (identifier) %3 = -Not used%4 = Magazine number Definitions: The desired tool motion command - triggered from the MMC or PLC - is not possible. The tool cannot be moved into the specified tool magazine. T here is no appropriate location for this tool. Reaction: NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: - Check whether the magazine data have been defined correctly (e.g. the magazine must not be disabled). - Check whether the tool data are correctly defined (for example, the tool location type must match the location types allowed in the magazine). - Check whether the magazine has simply no more r oom to accept another tool thanks to operating procedures. - Check whether a location type hierarchy is defined and whether, for example, it does not allow insertion of a type 'A' tool in a free location with type 'B'. Program Continuation: Clear alarm with the Delete key or NC START.