代码 7100: Compile cycles VDI area: %1 byte for inputs and %2 byte for outputs. Maximum %3 bytes available.
问题描述与安全警告
Siemens SINUMERIK 840D CNC 触发了严重的 Compile cycles VDI area: %1 byte for inputs and %2 byte for outputs. Maximum %3 bytes available. 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Parameters: %1 = String (machine data) %2 = String (machine data) %3 = Max. length for interface Definitions: The sum of the input and output bytes at the VDI us er interface for the comp ile cycles exceeds the maximum quantity of 400 bytes. Reaction: NC not ready. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: Please inform the authorized pers onnel/service department. Set the machine data for dividing up the VDI user interface of the compile cycles (DB 9) into input and output bytes in accordance with the functions in the compile cycles. The maximum quantity of 400 bytes must not be exceeded. There are no restrictions concerning the division into input and output bytes. Program Continuation: Switch control OFF - ON.
Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Siemens SINUMERIK 840D CNC 警报
由 Siemens 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 SINUMERIK 840D CNC 出现类似 7100 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 4014 Siemens SINUMERIK 840D CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 7100.
Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026