代码 75500: [Channel %1: ] HSLC: Configuration error ID=%2

Parameters: %1 = Channel number Definitions: The function CC_FASTON or CC_FASTON_CON T cannot be executed because the following MD configuration is incorrect: ID=2: The NCK system function "Timer-controlled cam signal output" (see De scription of Functions "Software cams, Position switching signals (N 3)" ) is configured with machine data MD 10480 $MN_SW_CAM_TIMER_FASTOUT_MASK > 0 at the same time as the function HSLC. As there is only one hardware timer on the NCU, only one of the two functions can be used. ID=4: Programming CC_FASTON and CC_FASTON _CONT requires internal block memory: In order to activate the compile cycle CCHSLC, t he entries have to be increased in the following machine data: MD 28090 $MC_MM_NUM_CC_BLOCK_ELEMENTS by 1 element MD 28100 $MC_MM_NUM_CC_BLOCK_USER_MEM by 2 [KB] Reaction: Alarm display. Remedy: Modify the stated MD settings Program Continuation: Clear alarm with the RESET key. Restart part program Diagnostics Manual (DAsl), 03/2009