コード Er-05: No-Load Current Error
問題の説明と安全警告
Yaskawa A1000 AC Drive は重大な No-Load Current Error アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Code type: Auto-tuning fault/alarm Manual section: Yaskawa A1000 Troubleshooting Motor data entered during Auto-Tuning was incorrect. - Make sure the data entered to the T1 parameters match the information written on the motor nameplate. - Restart Auto-Tuning and enter the correct information. Results from Auto-Tuning are outside the parameter setting range or the tuning process took too long. - Check and correct faulty motor wiring. - Perform Rotational Auto-Tuning. The load during Rotational Auto-tuning was too high. - Disconnect the motor from machine and restart Auto-Tuning. If motor and load cannot be uncoupled make sure the load is lower than 30%. - If a mechanical brake is installed, make sure it is fully lifted during tuning.
Source: Yaskawa AC Drive A1000 High Performance Vector Control Drive Technical Manual (SIEP C710616 21H)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Yaskawa A1000 AC Drive のアラームについて
Yaskawa によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。A1000 AC Drive が Er-05 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 280 Yaskawa A1000 AC Drive コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code Er-05.
Need a searchable reference for more Yaskawa A1000 AC Drive manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026