代码 700235: Tool life expired for cutting edge 1
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Tool life expired for cutting edge 1 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Tool life of cutting edge 1 of a tool is expired (applications/run time). Feed Stop after end of program (Program end with M02, M30 or change work area / table side) Tool attribute A of the corresponding tool will be set to (3). Exchange corresponding tool. See sequence description for the tool exchange, page 54. The exact fault diagnosis by which tool the tool life has expired, can be found under menu [Tool Managem.]. Corresponding tool is shown in the line Error on tool [ * * ] If need be, the program can be continued by "acknowledging" the error with the [FEED START] key (until the next "end of program", etc.).It is up to the operator to decide for how long he can continue to use the "expired" tool.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 700235 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700235.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026