代碼 701212: Tool revolver: XR axis not in position
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Tool revolver: XR axis not in position 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
To execute the tool changer functions, the XR-axis must be in the enable range for the tool change. A tool change is pending, but the XR-axis is not in the enable position for the tool change. Message is just for informational purposes and has no effect on the machine. The following message appears: Tool revolver: No enable tool change 1. To enable the tool changer functions, move the XR-axis to the enable position. 2. Check software position switch of the XR-axis. 3. Press [RESET] key. Message is cleared.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 701212 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701212.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026