代碼 702230: Check tool revolver reference point (sensor=1 == place 1)
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Check tool revolver reference point (sensor=1 == place 1) 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
It was determined that tool place 1 is in the machining position of the tool revolver and the PLC input signal "Tool revolver reference point" is registered. It was determined that tool place 1 is not in the machining position of the tool revolver and the PLC input signal "Tool revolver reference point" is not registered. Follow-up message Tool revolver slip clutch not engaged or Tool in the tool revolver not defined. Causes The error has the following effect: Feed Stop No axis movements possible. "Spindle Stop" Tool spindle is stopped. Speed no longer possible. 1. Put tool revolver at tool place 1 with manual functions. 2. Check the reference point. 3. PLC input signal "Tool revolver reference point" must not be registered. 4. Once the malfunction has been remedied, press [FEED START] key. Message is cleared.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 702230 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 702230.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026