代碼 701214: Tool revolver: No enable tool change
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Tool revolver: No enable tool change 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Either a "tool change" ( M6 ) has been programmed or the "manual tool change" function was activated with the [MANUAL TOOL CHANGE] key, but the enable for this is missing. Tool change is not executed. 1. Please see the additionally pending error messages. 2. Once the malfunction has been remedied, press [RESET] key The message is cleared. The release for “Tool change“ remains blocked if: the service function "M88“ (tool changer) is active. Service function M555/H55 (setting mode tool changer) is active.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 701214 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701214.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026