代碼 701512: Check sensor: >Oil/air lubrication > Operating pressure (air) present (spindle 2)<
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Check sensor: >Oil/air lubrication > Operating pressure (air) present (spindle 2)< 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Actuation "Oil/air lubrication valve, air operating pressure on" was deactivated, but the pressure sensor "Oil/air lubrication, air operating pressure available (SP2)" still signalled signal state=1 after 10 seconds. Feed Stop and Spindle Stop "Oil/air lubrication, air operating pressure valve on" is not switched on again. 1. Check the actuation of the "Oil/air lubrication" valve, "Air operating pressure on" valve. 2. Check the PLC input signal and the sensor "Oil/air lubrication, air operating pressure available (SP2)". 3. As soon as the malfunction is remedied, press one of the following keys: [FEED START] [CYCLE START] Message is cleared. The menu can be found under: Chapter 2.6 ‘Oil/air lubrication’ on page 12
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 701512 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701512.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026