Code 701627: Check sensor: >Magazine place free (background magazine)<

During collecting or depositing of a tool into the background magazine it was noticed that the PLC input signal “Magazine place free (background magazine)“ was on during the whole time of the tool change. During the tool change, the sensor is monitored for a signal change from (1) to (0). Tool gripper is still moved to the home position. Afterwards, the tool loader functions are stopped. 1. Check the sensor and the PLC input signal "Magazine place free (background magazine)". 2. Check the setting of the sensor relative to the adjustment instructions. NOTICE! Adjustment should only be carried out by trained and instructed personnel. 3. As soon as the malfunction is remedied, press one of the following keys: [FEED START] [CYCLE START] Message is cleared. The diagnostic overview of the sensor signals can be found under: Chapter 2.2 ‘Tool changer diagnostics menu’ on page 11 Error messages Background magazine Check sensor: >Magazine place free (background magazine)<