Código 12230: [Channel %1: ] Block %2 hexadecimal constant %3 in string too long

Parameters: %1 = Channel number %2 = Block number, label %3 = Hexadecimal constant Definitions: A string can also contain bytes that do not corresp ond to a character that can be entered or one that is available on a keyboard with a minimized number of keys. These c haracters can be input as binary or hexadecimal constants. They may occupy up to 1 byte each only - therefore be < 256, e.g. N10 DEF STRING[2] OTTO=" 'HCA' 'HFE' " Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Press the NC Stop key and select the function "C orrection block" with the softkey PROGRAM CORRECT. The correction pointer positions on the incorrect block. In the window for the alarm message, the first charac ters of the hexadecimal constant are always displayed although the surplus bit might not be located until further on. Therefore, the complete hexadecimal constant must always be checked for an incorrect value. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.