代码 14097: [Channel %1: ] Block %2 string cannot be converted to AXIS type

Parameters: %1 = Channel number %2 = Block number, label Definitions: The called function AXNAME - conversion of the tran sferred parameters of the STRING type to an axis name (return value) of the AXIS type - has not found this axis identifier in the machine data. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Please inform the authorized personnel/service depar tment. Check the transferred parameter (axis name) of the function AXNAME to determine whether a geometry, channel or machine axis of this name has been configured by means of the machine data: MD10000 $MN_AXCONF_MACHAX_NAME_TAB MD20060 $MC_AXCONF_GEOAX_NAME_TAB MD20080 $MC_AXCONF_CHANAX_NAME_TAB Select the transfer string in accordance with the ax is name, and change the axis name in the machine data if necessary. (If a change of name is to take place via the NC part program, this change must first be validated by means of a "POWER-ON"). Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.