代码 14100: [Channel %1: ] Block %2 orientation transformation not available

Parameters: %1 = Channel number %2 = Block number, label Definitions: Up to 4 transformation groupings (transformation types) can be set for each channel via machine data. If the keyword TRAORI(n) (n... number of the trans formation grouping) is used to address a transformation grouping for which the machine data is not defaulted, the alarm me ssage will be triggered. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Press the NC Stop key and select the function "C orrection block" with the softkey PROGRAM CORRECT. The correction pointer positions on the incorrect block. - Check the number of the transformation grouping when calling the part program with the keyword TRAORI(n) (n... number of the transformation grouping). - Enter the machine data for this transformat ion grouping and then activate by "Power On". Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.