代碼 201714: <location>SI Motion CU: Safely-Limited Speed exceeded

Message value: %1 Drive object: SERVO, VECTOR Reaction: NONE Acknowledge: IMMEDIATELY (POWER ON) Cause: The drive has moved faster than that specified by the velocity limit value (p9531). The drive is stopped as a result of the configured stop response (p9563). Message value (r9749, interpret decimal): 100: SLS1 exceeded. 200: SLS2 exceeded. 300: SLS3 exceeded. 400: SLS4 exceeded. 1000: Encoder limit frequency exceeded. Remedy: - check the traversing/motion program in the control. - check the limits for "Safely-Limit ed Speed (SLS) and if required, adapt (p9531). This message can be acknowledged as follows: - motion monitoring functions integrated in the driv e: Via Terminal Module 54F (TM54F) or PROFIsafe - motion monitoring functions with SI NUMERIK: Via the machine control panel Note: SI: Safety Integrated SLS: Safely-Limited Speed / SG: Safely reduced speed See also: p9531 (SI Motion SLS (SG) limit values (Control Unit)), p9563 (SI Motion SLS (SG)-specific stop response (Control Unit))