Volver a todos los modelos de Siemens Search all database
Siemens SINUMERIK 840D CNC
Códigos de error de Siemens SINUMERIK 840D CNC
Referencia completa de códigos de alarma y error para Siemens SINUMERIK 840D CNC. Explore a continuación los 4014 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Lista completa de alarmas (Page 7 of 21)
Código 25060
Axis %1 speed setpoint limitation
Ver solución Código 25070
Axis %1 drift value too large
Ver solución Código 25080
Axis %1 positioning monitoring
Ver solución Código 25100
Axis %1 measuring system switchover not possible
Ver solución Código 25105
Axis %1 measuring systems differ considerably
Ver solución Código 25110
Axis %1 selected encoder not available
Ver solución Código 25200
Axis %1 requested se t of parame ters invalid
Ver solución Código 25201
Axis %1 drive fault
Ver solución Código 25202
Axis %1 waiting for drive
Ver solución Código 26000
Axis %1 clamping monitoring
Ver solución Código 26001
Axis %1 parameterization error: friction compensation
Ver solución Código 26002
Axis %1 encoder %2 parameterization error: number of encoder marks
Ver solución Código 26003
Axis %1 parameterization error: lead screw pitch
Ver solución Código 26004
Axis %1 encoder %2 parameterization error: grid point distance with linear encoders
Ver solución Código 26005
Axis %1 parameteriza tion error: output rating
Ver solución Código 26006
Axis %1 encoder %2 encoder type/output type %3 not possible
Ver solución Código 26007
Axis %1 QEC: invalid coarse step size
Ver solución Código 26008
Axis %1 QEC: invalid fine step size
Ver solución Código 26009
Axis %1 QEC: memory overflow
Ver solución Código 26010
Axis %1 QEC: invalid acceleration characteristic
Ver solución Código 26011
Axis %1 QEC: in valid measuring periods
Ver solución Código 26012
Axis %1 QEC: feed forward control not active
Ver solución Código 26014
Axis %1 machine data %2 invalid value
Ver solución Código 26015
Axis %1 machine data %2[%3] invalid value
Ver solución Código 26016
Axis %1 machine data %2 invalid value
Ver solución Código 26017
Axis %1 machine data %2[%3] invalid value
Ver solución Código 26018
Axis %1 setpoint output drive %2 used more than once
Ver solución Código 26019
Axis %1 encoder %2 measurement not possible with this controller module
Ver solución Código 26022
Axis %1 encoder %2 measurement with simulated encoder not possible
Ver solución Código 26024
Axis %1 machine data %2 value changed
Ver solución Código 26025
Axis %1 machine data %2[%3] value changed
Ver solución Código 26026
Axis %1 SINAMICS drive parameter P2038 value is not allowed.
Ver solución Código 26030
Axis %1 encoder %2 absolute position lost
Ver solución Código 26031
Axis %1 configuration error master-slave
Ver solución Código 26032
[Channel %1: ] Axis %2 master-slave not configured
Ver solución Código 26050
Axis %1 parameter set change from %2 to %3 not possible
Ver solución Código 26051
[Channel %1: ] In block %2 unanticipated stop crossed in continuous path mode
Ver solución Código 26052
[Channel %1: ] In block %2: path velocity too high for auxiliary function output
Ver solución Código 26053
[Channel %1: ] Block %2 interpolation problem in Look Ahead (module %3, identifier %4)
Ver solución Código 26054
[Channel %1: ] Block %2 interpolation warning in Look Ahead (module %3, problem %4)
Ver solución Código 26070
[Channel %1: ] Axis %2 cannot be controlled by the PLC, max. number exceeded
Ver solución Código 26072
[Channel %1: ] Axis %2 cannot be controlled by the PLC
Ver solución Código 26074
[Channel %1: ] Switching off PLC control of axis %2 not allowed in the current state
Ver solución Código 26075
[Channel %1: ] Axis %2 not available for the NC program, as exclusively controlled by the PLC
Ver solución Código 26076
[Channel %1: ] Axis %2 not available for NC program, firmly assigned PLC axis
Ver solución Código 26100
Axis %1 drive %2 sign of life missing
Ver solución Código 26101
Axis %1 drive %2 communication failure
Ver solución Código 26102
Axis %1 drive %2 sign of life missing
Ver solución Código 26105
Drive of axis %1 not found
Ver solución Código 26106
Encoder %2 of axis %1 not found
Ver solución Código 26120
[Channel %1: ] Axis %2 $AA_ESR_ENABLE = 1 but axis should be set to NEUTRAL
Ver solución Código 26121
[Channel %1: ] Axis %2 is NEUTRAL and $AA_ESR_ENABLE = 1 should be set
Ver solución Código 26122
[Channel %1: ] Axis %2, $AA_ESR_ENABLE = 1, axis exchange not executed in this state
Ver solución Código 26123
[Channel %1: ] Axis %2, $AA_ESR_ENABLE = 1 should be set, but MD37500 $MA_ESR_REACTION = 0
Ver solución Código 26124
[Channel %1: ] Axis %2, $AC_ESR_TRIGGER triggered but axis is NEUTRAL and cannot execute ESR
Ver solución Código 26200
[Channel %1: ] Block %2: The names of the kinematic chains $NK_CHAIN_NAME[%3] and $NK_C HAIN_NAME[%4] are the same]
Ver solución Código 26202
[Channel %1: ] Block %2: The names of the kinematic chain links $NK_NAME[%3] and $NK_NAME[%4] are the same]
Ver solución Código 26204
[Channel %1: ] Block %2: The chain element %3 referred to in $NK_NEXT[%4] is already contained in the chain
Ver solución Código 26206
[Channel %1: ] Block %2: The chain element %3, referred to in $NK_1ST_ELEM[%4], was not found
Ver solución Código 26208
[Channel %1: ] Block %2: Chai n element %3, referred to in $NK_NEXT[%4], was not found
Ver solución Código 26210
[Channel %1: ] Block %2: Chain %3, referred to in $NK_NEXTP[%4], was not found
Ver solución Código 26212
[Channel %1: ] Block %2: Maximum number of %3 chain elements exceeded
Ver solución Código 26214
[Channel %1: ] Block %2: The maximum permissible value of fine offset in chain element %3 was exceeded
Ver solución Código 26216
[Channel %1: ] Block %2: The axis direction in chain element %3 has not been defined.
Ver solución Código 26218
[Channel %1: ] Block %2 : Invalid name in %3[%4]
Ver solución Código 26222
[Channel %1: ] Block %2: The names of the protection areas $NP_PROT_NAME[%3] and $NP_ PROT_NAME[%4] are the same
Ver solución Código 26224
[Channel %1: ] Block %2: The names of the protection area elements $NP_NAME[%3] and $NP_NAME[%4] are the same
Ver solución Código 26226
[Channel %1: ] Block %2: Invalid pr otection area type in $NP_TYPE[%3]
Ver solución Código 26227
[Channel %1: ] Block %2: CAD fi le not found: %3
Ver solución Código 26228
[Channel %1: ] Block %2: The protection area element %3, referred to in $NP_1ST_PROT[%4], was not found
Ver solución Código 26230
[Channel %1: ] Block %2: Protection area element %3, referred to in $NP_NEXT[%4], was not found
Ver solución Código 26231
[Channel %1: ] Block %2: The protection zone or the CAD file %3 referred to in $TC_TP_PROTA[%4] was not found.
Ver solución Código 26232
[Channel %1: ] Block %2: Maximum number of %3 protection area elements exceeded
Ver solución Código 26233
[Channel %1: ] Block %2: The maximum permissible number of tool protection zone elements has been exceeded.
Ver solución Código 26234
[Channel %1: ] Block %2: The protection area $NP_PROT_NAME[%3] does not contain any protection area elements
Ver solución Código 26236
[Channel %1: ] Block %2: Protection area element %3, referred to in $NP_NEXT[%4], is already contained in the definition chain
Ver solución Código 26238
[Channel %1: ] Block %2: Protection area %3, referred to in $NP_ADD[%4], was not found
Ver solución Código 26240
[Channel %1: ] Block %2: The protection area indicated in $NP_ADD[%3] is linked with a kinematic chain
Ver solución Código 26241
[Channel %1: ] Block %2: The tool protection zone %3 ($NP_PROT_NAME[%4]) contains a reference to a kinematic chain.
Ver solución Código 26242
[Channel %1: ] Block %2: Name of the kinematic chain in $NP_CHAIN_NAME[%3] not defined
Ver solución Código 26244
[Channel %1: ] Block %2: Protection area %3, referred to in $NP_ADD[%4], is already contai ned in the definition chain
Ver solución Código 26246
[Channel %1: ] Block %2: Para meter $NP_PARA[%3,%4] is invalid
Ver solución Código 26248
[Channel %1: ] Block %2: The contents (%4) of parameter $NP_BIT_NO[%3] are invalid
Ver solución Código 26250
[Channel %1: ] Block %2: The names of the protection area groups $NP_NAME[%3] and $NP_NAME[%4] are the same
Ver solución Código 26252
[Channel %1: ] Block %2: Element %4 of the protection area group %3 is not linked with a kinematic chain
Ver solución Código 26254
[Channel %1: ] Block %2: The protection area referred to in element %4 of protection area group %3 was not found
Ver solución Código 26256
[Channel %1: ] Block %2: The protection area group %3 referred to in $NP_ADD_GROUP[%4] was not found
Ver solución Código 26260
[Channel %1: ] Block %2: Collision of the two protection areas %3 and %4
Ver solución Código 26261
[Channel %1: ] The two protection zones %2 and %3 collide
Ver solución Código 26262
[Channel %1: ] Not enough memory space during collision test of the two protection zones %2 and %3. Current ly available memory space: %4KB.
Ver solución Código 26263
[Channel %1: ] Block %2: Not enough memory space for determining the distance between two protection zones. Currently available memory space: %3KB.
Ver solución Código 26264
[Channel %1: ] Block %2: The protection area with the name %3 was not found.
Ver solución Código 26266
[Channel %1: ] Block %2: The protection area with the name %3 was programmed several times.
Ver solución Código 26268
[Channel %1: ] Block %2: Protection area %3 has not been assigned an interface bit
Ver solución Código 26270
[Channel %1: ] Block %2: Invaid activation parameter during the PROTA function call
Ver solución Código 26272
[Channel %1: ] Block %2: The contents (%3) of parameter $NP_INIT_STAT[%4] are invalid
Ver solución Código 26274
[Channel %1: ] Block %2: Chain %3 referred to in $NP_CHAIN_NAME[%4] was not found
Ver solución Código 26276
[Channel %1: ] Block %2: Chain element %3 referred to in $NP_CHAIN_ELEM[%4] was not found
Ver solución Código 26278
[Channel %1: ] Block %2: The axis or frame name %3 contained in $NK_AXIS[%4] is unknown
Ver solución Código 26280
[Channel %1: ] Axis %2 risk of collision %3 %4
Ver solución Código 26281
[Channel %1: ] Axis %2 risk of collision %3 %4
Ver solución Código 26282
[Channel %1: ] Block %2: Invalid definition of the protection zones or the kinematic chains.
Ver solución Código 26284
[Channel %1: ] Block %2: The call of the function / procedure %3 is only permissible if the function 'C ollision monitoring' is present.
Ver solución Código 26286
[Channel %1: ] Axis %2 risk of collision preactivated protection zones interface signal(s) %3
Ver solución Código 26290
[Channel %1: ] Block %2: Maximum number of %4 protection zone facets exceeded in CAD file %3
Ver solución Código 26292
[Channel %1: ] Block %2: Maximum number of %4 input points exceeded in CAD file %3
Ver solución Código 26294
[Channel %1: ] Block %2: CAD file %3 is not a valid VRML file
Ver solución Código 26296
[Channel %1: ] Block %2: CAD fi le %3 is not a valid STL file
Ver solución Código 27000
Axis %1 is not safely referenced
Ver solución Código 27001
Axis %1 error in a monitoring channel, code %2, values: NCK %3, drive %4
Ver solución Código 27002
Axis %1 test stop is running
Ver solución Código 27003
Checksum error found: %1 %2
Ver solución Código 27004
Axis %1, difference safe input %2, NCK %3, drive %4
Ver solución Código 27005
Axis %1 error in data cross check: static actual value difference
Ver solución Código 27006
Axis %1 Test ext. pulse deletion running
Ver solución Código 27007
Axis %1 acceptance test mode is active
Ver solución Código 27008
Axis %1 SW limit switch deactivated
Ver solución Código 27010
Axis %1 tolerance for safe standstill exceeded
Ver solución Código 27011
Axis %1 safe velocity exceeded
Ver solución Código 27012
Axis %1 safe end position exceeded
Ver solución Código 27013
Axis %1 Safe monitoring for acceleration exceeded
Ver solución Código 27020
Axis %1 stop E triggered
Ver solución Código 27021
Axis %1 stop D triggered
Ver solución Código 27022
Axis %1 stop C triggered
Ver solución Código 27023
Axis %1 stop B triggered
Ver solución Código 27024
Axis %1 stop A triggered
Ver solución Código 27030
Axis %1 function not supported on this SIMODRIVE611D module
Ver solución Código 27031
Axis %1 limit value for safe velocity %2 at gear ratio %3 too large (max. %4)
Ver solución Código 27032
Axis %1 checksum error of safe monitoring. Confirmation and acceptance test required.
Ver solución Código 27033
Axis %1 parameterizati on of MD %2[%3] invalid
Ver solución Código 27034
Parameterization of MD %1[%2] invalid.
Ver solución Código 27035
Axis %1 new hardware component, confirmation and functional test required.
Ver solución Código 27036
Axis %1 encoder parameterization MD %2[%3] has been adjusted.
Ver solución Código 27037
Axis %1 and %2 with the same PROFIsafe address %3.
Ver solución Código 27038
Axis %1 value %2 in drive parameter %3 violates the limits of NCK MD %4.
Ver solución Código 27039
Axis %1 parameterization MD %2[%3] changed, confirmation and functional test required.
Ver solución Código 27040
Axis %1 waiti ng for motor module.
Ver solución Código 27050
Axis %1 SI communication failure.
Ver solución Código 27060
Axis %1 Drive assignment checksum error. Confirmation and acceptance test required!
Ver solución Código 27070
Checksum error parameterization SPL and SPL interfaces. Confirmation and acceptance test required!
Ver solución Código 27071
Checksum error safe PLC para meterization. Confirmation and acceptance test required!
Ver solución Código 27072
Checksum error enable safe communication. Confirmation and acceptance test required!
Ver solución Código 27073
Checksum error S7 PROFIsafe configuration. Confirmation and acceptance test required!
Ver solución Código 27090
Error in data cross check NCK-PLC, %1[%2], NCK: %3; %4<ALSI>
Ver solución Código 27091
Error in data cross check NCK-PLC, stop of %1
Ver solución Código 27092
Communication broken off during NCK PLC data cross check, error detected by %1
Ver solución Código 27093
Checksum error NCK-SPL, %1, %2, %3
Ver solución Código 27094
Write access to system variable %1 only allowed from NCK-SPL
Ver solución Código 27095
%1 SPL protection not activated
Ver solución Código 27096
SPL start not allowed
Ver solución Código 27097
SPL start not executed
Ver solución Código 27098
SPL commissioning phase terminated
Ver solución Código 27099
Double assignment in SPL assignment MD %1[%2] - MD %3[%4]
Ver solución Código 27100
At least one axis is not safely referenced
Ver solución Código 27101
Axis %1 difference in function safe operational stop, NCK: %2 drive: %3
Ver solución Código 27102
Axis %1 difference in function safe velocity %2, NCK: %3 drive: %4
Ver solución Código 27103
Axis %1 difference in function safe limit position %2, NCK: %3 drive: %4
Ver solución Código 27104
Axis %1 difference in function safe cam plus %2, NCK: %3 drive: %4
Ver solución Código 27105
Axis %1 difference in function safe cam minus %2, NCK: %3 drive: %4
Ver solución Código 27106
Axis %1 difference in function safe velocity nx, NCK: %2 drive: %3
Ver solución Código 27107
Axis %1 difference in function cam modulo monitoring, NCK: %2 drive: %3
Ver solución Código 27110
Axis %1 fault during data transmission index%2.
Ver solución Código 27111
Axis %1 fault during encoder evaluation of the safe actual value.
Ver solución Código 27112
Axis %1 CRC error of the safe actual value.
Ver solución Código 27113
Axis %1 hardware encoder error of the safe actual value.
Ver solución Código 27124
Stop A triggered at least in 1 axis
Ver solución Código 27140
Waiting for motor module of at least one axis.
Ver solución Código 27200
PROFIsafe: cycle time %1 [ms] too long
Ver solución Código 27201
PROFIsafe: MD %1[%2]: bus segment %3 error
Ver solución Código 27202
PROFIsafe: MD %1[%2]: address %3 error
Ver solución Código 27203
PROFIsafe: MD %1[%2]: SPL assignment error
Ver solución Código 27204
PROFIsafe: double assignment MD %1[%2] - MD %3[%4]
Ver solución Código 27205
PROFIsafe: number of signals in MD %1 [%2] <> MD %3[%4]
Ver solución Código 27206
PROFIsafe: MD %1[%2] maximum number of F user data (%3 bits) exceeded.
Ver solución Código 27207
PROFIsafe: MD %1[%2] max. sub slot number: %3 exceeded
Ver solución Código 27208
PROFIsafe: MD %1[%2]: max. sub-slot address %3 exceeded.
Ver solución Código 27220
PROFIsafe: Number of NCK F modules (%1) <> Number of S7 F modules (%2)
Ver solución Código 27221
PROFIsafe: NCK F module MD %1[%2] unknown
Ver solución Código 27222
PROFIsafe: S7 F module PROFIsafe address %1 unknown
Ver solución Código 27223
PROFIsafe: NCK F module MD %1[%2] is not a %3 module
Ver solución Código 27224
PROFIsafe: F module MD %1[%2] - MD %3[%4]: double assignment of PROFIsafe address
Ver solución Código 27225
PROFIsafe: slave %1, configuration error %2
Ver solución Código 27240
PROFIsafe: DP M not running up, DP info: %1
Ver solución Código 27241
PROFIsafe: DP M version different, NCK: %1, PLC: %2
Ver solución Código 27242
PROFIsafe: F module %1, %2 faulty
Ver solución Código 27250
PROFIsafe: configur ation in DP M changed; error code %1 - %2
Ver solución Código 27251
PROFIsafe: F module %1, %2 reports error %3
Ver solución Código 27252
PROFIsafe: Slave %1, sign-of-life error
Ver solución Código 27253
PROFIsafe: communication faul t F master component %1, error %2
Ver solución Código 27254
PROFIsafe: F module %1, error on channel %2; %3<ALSI>
Ver solución Código 27255
PROFIsafe: F module %1, general error
Ver solución Código 27256
PROFIsafe: Current cycle time %1 [ms]> parameterized cycle time
Ver solución Código 27257
PROFIsafe: %1 %2 re ports system error %3 (%4)
Ver solución Código 27299
PROFIsafe: Diagnostics %1 %2 %3 %4
Ver solución Código 27300
F_DP: Cycle time %1 [ms] is too long
Ver solución Código 27301
F_DP: MD %1[%2]: SPL interface faulty
Ver solución Código 27302
F_DP: Double assignment MD %1[%2] - MD %3[%4]
Ver solución Código 27303
F_DP: Number of signals in MD %1 [%2] <> MD %3[%4]
Ver solución Código 27305
F_DP: Parameter MD %1 [%2] <> MD %3[%4]
Ver solución Código 27306
F_DP: Maximum number of active SPL connections (%1) exceeded for %2.
Ver solución