Siemens SINUMERIK 840D CNC 錯誤代碼

[Channel %1: ] Block %2 block syntax cannot be interpreted

[Channel %1: ] Block %2 G function not separately programmed

[Channel %1: ] Block %2 illegal tool orientation

[Channel %1: ] Block %2 functionality %3 not implemented

[Channel %1: ] Block %2 operation %3 not compatible with data type

[Channel %1: ] Block %2 Value %3 lies beyond the value range

[Channel %1: ] Block %2 Error on defining the limit %3

[Channel %1: ] Block %2 Physical unit not allowed

[Channel %1: ] Block %2 Change of access protection not allowed

[Channel %1: ] Block %2 name %3 defined several times

[Channel %1: ] Block %2 illegal chaining of operators %3

[Channel %1: ] Block %2 a bit combination with %3 is not permitted

[Channel %1: ] Block %2 variab le of type ARRAY has too many dimensions

[Channel %1: ] Block %2 symbol %3 cannot be created

[Channel %1: ] Block %2 area specification missing for GUD area

[Channel %1: ] Block %2 string %3 too long

[Channel %1: ] Block %2 binary constant %3 in string too long

[Channel %1: ] Block %2 hexadecimal constant %3 in string too long

[Channel %1: ] Block %2 tool orientation %3 defined repeatedly

[Channel %1: ] Block %2 nested macro %3 not possible

[Channel %1: ] Block %2 too many initialization values specified %3

[Channel %1: ] Block %2 initialization of %3 not allowed

[Channel %1: ] Block %2 macro identifier %3 already defined

[Channel %1: ] Block %2 maximum macro length %3 exceeded

[Channel %1: ] Block %2 arithmetic variable %3 not defined

[Channel %1: ] Block %2 call-by-reference parameter missing on subroutine call %3

[Channel %1: ] Block %2 axis parameter missing on procedure call %3

[Channel %1: ] Block %2 parameter %3 is no variable

[Channel %1: ] Block %2 ty pe of parameter %3 incorrect

[Channel %1: ] Block %2 number of parameters too high %3

[Channel %1: ] Block %2 parameter %3 no longer possible

[Channel %1: ] Block %2 dimension of parameter %3 incorrect

[Channel %1: ] Block %2 range of values %3 not permissible

[Channel %1: ] Block %2 maximum memory capacity reached

[Channel %1: ] Block %2 initialization value %3 cannot be converted

[Channel %1: ] Block %2 fi eld %3 element does not exist

[Channel %1: ] Block %2 incorrect index type for %3

[Channel %1: ] Block %2 identifier %3 too long

[Channel %1: ] Block %2 specified index is invalid

[Channel %1: ] Block %2 maxi mum number of formal arguments exceeded

[Channel %1: ] Block %2 label defined twice

[Channel %1: ] Block %2 maximum number of symbols exceeded with %3

[Channel %1: ] Block %2 G function %3 is unknown

[Channel %1: ] Block %2 invalid G function number %3 programmed

[Channel %1: ] Block %2 subroutine %3 already defined

[Channel %1: ] Block %2 program attribute %3 not allowed

[Channel %1: ] Block %2 access permission level %3 is not valid

Channel %1 Block %2 Change (definition) of data class %3 is not allowed here

[Channel %1: ] Block %2 in this module %3 is not possible

[Channel %1: ] Block %2 too many machine data %3

[Channel %1: ] Block %2 too many tool parameters %3

[Channel %1: ] Block %2 invalid index for %3

[Channel %1: ] Block %2 Block is too long or too complex

[Channel %1: ] Block %2 name %3 not defined or option/function not activated

[Channel %1: ] Block %2 tool/magazine OEM parameter not defined. Option not set. Option not set.

[Channel %1: ] Block %2 name %3 option/function is not active

[Channel %1: ] Block %2 replacement cycle %3 for the predefined procedure is missing.

[Channel %1: ] Block %2 function not available (identification %3)

[Channel %1: ] Block %2 name %3 Name is already known

[Channel %1: ] Block %2 programmed value %3 exceeds allowed limits

[Channel %1: ] Block %2 too many motion synchronous actions in %3

[Channel %1: ] Block %2 %3 not permissible for motion synchronous action

[Channel %1: ] Block %2 %3 only permissible for motion synchronous action

[Channel %1: ] Block %2 motion-synchronous action: Call by reference parameters not allowed %3

[Channel %1: ] Block %2 %3 not permissible for assignment in motion synchronous action

[Channel %1: ] Block %2 invalid read access to %3 while in motion synchronous action

[Channel %1: ] Block %2 field index %3 incorrect

[Channel %1: ] Block %2 variable %3 no system variable

[Channel %1: ] Block %2 variable %3 cannot be read synchronously with motion

[Channel %1: ] Block %2 variable %3 cannot be changed synchronously with motion

[Channel %1: ] Block %2 motion synchronous action: type conflict in variable %3

[Channel %1: ] Block %2 motion synchronous action: operation/function %3 not allowed

[Channel %1: ] Block %2 motion synchronous action: address %3 not allowed

[Channel %1: ] Block %2 motion synchronous action: variable %3 not allowed with modal ID

[Channel %1: ] Block %2 global user data cannot be created

[Channel %1: ] Block %2 invalid line checksum

[Channel %1: ] Block %2 accessi ng single character with call-by- reference parameter not possible %3

[Channel %1: ] Block %2 accessing th is variable as single character not possible %3

[Channel %1: ] Block %2 skip ID/label in control structure not allowed

[Channel %1: ] Block %2 invalid nesting of control structures

[Channel %1: ] Block %2 maximum nesting depth of control structures exceeded

Channel %1 block %2 axis identifier %3 different in channel %4

[Channel %1: ] Block %2 motion synchronous action: variable %3 reserved formotion synchronous actions and technology cycles

[Channel %1: ] Block %2 technology cycle %3: no further subprogram call possible

[Channel %1: ] Block %2 contour definition programming not allowed as modal sub-programis active

[Channel %1: ] Block %2 illegal interpolation type for contour definition active

[Channel %1: ] Block %2 illegal language element in external language mode

[Channel %1: ] Block %2 program number for macro call (G65/G66) missing

[Channel %1: ] Block %2 multiple ISO_2/3 macro or cycle calls in the block

[Channel %1: ] Block %2 no radius programmed for cylinder interpolation acti vation/deactivation

[Channel %1: ] Block %2 illegal plane selection with parallel axes

[Channel %1: ] Block %2 distance for double turret not set

[Channel %1: ] Block %2 no valid transformation machine data parameterized

[Channel %1: ] Block %2 modal macro call %3 not possible

[Channel %1: ] Block %2 illegal end of file

[Channel %1: ] Block %2 illegal end of block

[Channel %1: ] Block %2 program %3 program-specific start disable has been set

[Channel %1: ] Block %2 invalid program name %3

[Channel %1: ] Block %2 WRITE command writes in the temporary memory area in /_N_EXT_DIR

[Channel %1: ] Block %2 illegal program path %3

[Channel %1: ] Block %2 invalid default parameter in subroutine call

[Channel %1: ] Block %2 program %3 not existing or will be edited

[Channel %1: ] Block %2 maximum subroutine level exceeded

[Channel %1: ] Block %2 number of subroutine passes invalid

[Channel %1: ] Selected program %3 not available or will be edited

[Channel %1: ] Block %2 program %3 is not enabled

[Channel %1: ] Block %2 error when calling the subroutine via M/T function

[Channel %1: ] Block %2 syntax error when calling the subroutine via M function

[Channel %1: ] Block %2 parts program command %3 not executable (protection level setpoint value / actual value: %4)

[Channel %1: ] Block %2 wrong value or wrong number of parameters on function or procedure call

[Channel %1: ] Block %2 wrong value or wrong number of parameters on function or procedure call

[Channel %1: ] Block %2 error on function or procedure call, error code %3

[Channel %1: ] Block %2 motion synchronous action: illegal modal ID

[Channel %1: ] Block %2 motion synchronous action: invalid polynomial number in the FCTDEF command

[Channel %1: ] Block %2 motion-synchronous action: Too many technology cycles programmed.

[Channel %1: ] Block %2 motion-s ynchronous action: Technology cycle programmed with t oo many parameters

[Channel %1: ] Block %2 combine OSCILL and POSP during oscillation with infeedmotion

[Channel %1: ] Block %2 involute: no end point programmed

[Channel %1: ] Block %2 involute: angle of rotation too large

[Channel %1: ] Block %2 involute: start point invalid

[Channel %1: ] Block %2 involute: end point invalid

[Channel %1: ] Block %2 involute: radius invalid

[Channel %1: ] Block %2 involute not definable: end point error

[Channel %1: ] Block %2 involute: end point programmed several times

[Channel %1: ] Block %2 error in end point of circle

[Channel %1: ] Block %2 error in tangential circle programming

[Channel %1: ] Block %2 wrong number of revolutions in circle programming

[Channel %1: ] Block %2 nesting depth for arithmetic operations exceeded

[Channel %1: ] Block %2 arithmetic error in part program

[Channel %1: ] Block %2 impermissible NC language substitution, error code %3

[Channel %1: ] Block %2 invalid skip level with differential block skip

[Channel %1: ] Block %2 memory for variable s not sufficient for subroutine call

[Channel %1: ] Block %2 jump destination %3 not found

[Channel %1: ] Block %2 label %3 program section not found

[Channel %1: ] Block %2 instruction not allowed

[Channel %1: ] Block %2 axis %3 doubtful position

[Channel %1: ] Block %2 invalid D number

[Channel %1: ] Block %2 illegal function, index %3

[Channel %1: ] Block %2 axis %3 is wrong axis type

[Channel %1: ] Block %2 path interval <= 0 with polynominal interpolation

[Channel %1: ] Block %2 polynominal degree greater than 3 programmed for polynominal interpolation

[Channel %1: ] Block %2 radius for circle programming too small

[Channel %1: ] Block %2 illegal type conversion

[Channel %1: ] Block %2 string cannot be converted to AXIS type

[Channel %1: ] Block %2 conversion error: no valid number found

[Channel %1: ] Block %2 result in string concatenation too long

[Channel %1: ] Block %2 orientation transformation not available

[Channel %1: ] Block %2 orientation transformation not active

[Channel %1: ] Block %2 polynominal degree greater than 5 programmed for orientation vector angle

[Channel %1: ] Block %2 Active transformation allows neither vector programming nor interpolation

[Channel %1: ] Block %2 Euler angles and orientation vector components programmed

[Channel %1: ] Block %2 Euler angles, orientation vector and transformation axes programmed

[Channel %1: ] Block %2 programmed orientation path not possible

[Channel %1: ] Block %2 programmed lead angle too large

[Channel %1: ] Block %2 programmed tilt angle too large

[Channel %1: ] Block %2 illegal definition of workpiece surface

[Channel %1: ] Block %2 absolute orientation programmed while ORIPATH/ORIPATHS is active

[Channel %1: ] Block %2 no angle or direction of the cone programmmed

[Channel %1: ] Block %2 no end orientation programmed

[Channel %1: ] Block %2 no intermediate orientation programmed

[Channel %1: ] Block %2 plane determination for programmed orientation not possible

[Channel %1: ] Block %2 no orientation defined (distance equals zero).

[Channel %1: ] Block %2 angle and direction of the cone programmed

[Channel %1: ] Block %2 nutation angle of the cone too small

[Channel %1: ] Block %2 start tangent for orientation is zero

[Channel %1: ] Block %2 programmed rotation is not possible

[Channel %1: ] Block %2 ORIPATH lift factor impermissible.

[Channel %1: ] Block %2 rotation programmed several times

[Channel %1: ] Block %2 absolute programming of the orienting rotation with active ORIROTC.

[Channel %1: ] Block %2 orientation angles and orientation vector components programmed

[Channel %1: ] Block %2 too many initialization values given

[Channel %1: ] Block %2 orientation axes and lead/tilt angles programmed

[Channel %1: ] Block %2 orientation axes incorrectly configured

[Channel %1: ] Block %2 G code for orientation definition not allowed

[Channel %1: ] Block %2 G code for orientation interpolation not allowed

[Channel %1: ] Block %2 Orientation polynomial is not permitted

[Channel %1: ] Block %2 Polynomials PO[PHI] and PO[PSI] are not permitted

[Channel %1: ] Block %2 Polynomials PO[XH], PO[YH] and PO[ZH] are not permitted

[Channel %1: ] Block %2 Polynomial for angle of rotation PO[THT] is not permitted

[Channel %1: ] Block %2 position programming without transformation not allowed

[Channel %1: ] Block %2 PTP movement not allowed

[Channel %1: ] Block %2 CP or PTP movement without transformation not allowed

[Channel %1: ] Block %2 spline for orientation not possible.

[Channel %1: ] Illegal reference system for Cartesian manual traverse

[Channel %1: ] Block %2 illegal tool carrier number programmed or declared (MD)

[Channel %1: ] Block %2 illegal tool carrier rotation

[Channel %1: ] Block %2 tool carrier: invalid orientation. Error code: %3

[Channel %1: ] Block %2 unknown tool carrier type: %3

[Channel %1: ] Block %2 The amount of fine correction in parameter %3of the orientable toolholder %4 is too large

[Channel %1: ] Block %2 invalid base frame definition for tool carrier offset

[Channel %1: ] Toolholder selection error at reset

[Channel %1: ] Block %2 illegal interpolation type with MOVT

[Channel %1: ] Block %2 more than two angles programmed with ROTS or AROTS

[Channel %1: ] Block %2 tool length selection without geometry axis specification

[Channel %1: ] Block %2 error %3 on activation of the CUTMOD function

[Channel %1: ] Block %2 selected ISO H/D number %3 does not match tool %4

[Channel %1: ] Block %2 error %3 when programming a tool length offset with TOFF / TOFFL

[Channel %1: ] Block %2 illegal interpolation type with tool length compensation

[Channel %1: ] Block %2 H number %3 is not defined

[Channel %1: ] Block %2 ISO tool offset %3 not present