Zurück zu allen Siemens Modellen Search all database
Siemens SINUMERIK 840D CNC
Siemens SINUMERIK 840D CNC Fehlercodes
Vollständige Alarm- und Fehlercode-Referenz für die Siemens SINUMERIK 840D CNC. Durchsuchen Sie unten alle 4014 dokumentierten Fehlercodes, die jeweils zu einer detaillierten Anleitung zur Fehlerbehebung führen.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Vollständige Alarmliste (Page 2 of 21)
Code 7201
Assertion error in %1 line %2
Lösung ansehen Code 7202
Missing option bit for %1: %2 <hex>
Lösung ansehen Code 7205
[Channel %1: ] Incompatible OEM transformation version NCK %2 CC %3
Lösung ansehen Code 7300
Problem with externally linked COA application %1 Index: %2 Additional information: %3
Lösung ansehen Code 7301
Assertion error in %1 line %2
Lösung ansehen Code 7500
Block %1 invalid protection level for command %2 (protection level act.: %3 prog.: %4)
Lösung ansehen Code 8000
[Channel %1: ] Option 'Interrupt routines' not set
Lösung ansehen Code 8010
Option 'activation of more than %1 axes' not set
Lösung ansehen Code 8020
Option 'activation of more than %1 channels' not set
Lösung ansehen Code 8021
Option 'activation of more than %1 mode groups' not set
Lösung ansehen Code 8022
Option 'activation of more than %1KB SRAM' not set
Lösung ansehen Code 8023
Option 'Activation of more than %1 KB PLC user memory' not set
Lösung ansehen Code 8024
Option 'Activation of more than %1 magazines' not set
Lösung ansehen Code 8030
[Channel %1: ] Block %2 option 'interpolation of more than %3 axes' not set
Lösung ansehen Code 8031
[Channel %1: ] Block %2 axis %3: Axis has no IPO functionality
Lösung ansehen Code 8032
Option 'activation of more than %1 link axes' not set
Lösung ansehen Code 8034
Option 'activation of axis containers' not set
Lösung ansehen Code 8036
Option: it is not allo wed to set different IPO cycles or position control cycles with NCU link.
Lösung ansehen Code 8037
'Activate APC/Number of curren t setpoint filters' option not set.
Lösung ansehen Code 8038
Option 'activation of more than %1 lead link axes' not set
Lösung ansehen Code 8040
Machine data %1 reset, corresponding option is not set
Lösung ansehen Code 8041
Axis %1: MD %2 reset, corresponding option not sufficient
Lösung ansehen Code 8044
Option for IPO cycle time %1 ms not set
Lösung ansehen Code 8050
Option 'SPL inputs/outputs' not set.
Lösung ansehen Code 8051
Option 'Handwheel on PROFIBUS' not set
Lösung ansehen Code 8080
%1 option(s) is/are activated without setting the license key
Lösung ansehen Code 8081
%1 option(s) is/are activated that are not licensed by the license key
Lösung ansehen Code 8082
A wrong license key was entered three times, Power On required before next try.
Lösung ansehen Code 8088
'Selection of non-grinding-specific tools' option not possible
Lösung ansehen Code 8098
Invalid combination of options (%1)
Lösung ansehen Code 8100
[Channel %1: ] Block %2: function not possible
Lösung ansehen Code 8101
Option for collision avoidance is inadequate
Lösung ansehen Code 8120
[Channel %1: ] Block %2 following axis/spindle %3 generic coupling %4 required
Lösung ansehen Code 9000
Handwheel %1 failed
Lösung ansehen Code 9050
PROFIBUS I/O: Sign of life failur e, logical slot / I/O area address %1
Lösung ansehen Code 9052
PROFIBUS I/O: Sign of life failur e, logical slot / I/O area address %1
Lösung ansehen Code 10203
[Channel %1: ] NC start without reference point (action=%2<ALNX>)
Lösung ansehen Code 10207
[Channel %1: ] Error when selecting or deselecting the digitize function
Lösung ansehen Code 10208
[Channel %1: ] Continue program with NC start
Lösung ansehen Code 10209
[Channel %1: ] Internal NC stop after block search
Lösung ansehen Code 10222
[Channel %1: ] Inter-channel communication not possible
Lösung ansehen Code 10223
[Channel %1: ] Command %2 is already occupied
Lösung ansehen Code 10225
[Channel %1: ] command denied
Lösung ansehen Code 10261
[Channel %1: ] Communication overload for block preparation
Lösung ansehen Code 10299
[Channel %1: ] Auto-Repos function is not enabled
Lösung ansehen Code 10600
[Channel %1: ] Block %2 auxiliary function during thread cutting active
Lösung ansehen Code 10601
[Channel %1: ] Block %2 zero veloci ty at block end point during thread cutting
Lösung ansehen Code 10602
[Channel %1: ] Block %2 velocity limitation during thread cutting
Lösung ansehen Code 10604
[Channel %1: ] Block %2 thread pitch increase too high
Lösung ansehen Code 10605
[Channel %1: ] Block %2 thread pitch decrease too high
Lösung ansehen Code 10607
[Channel %1: ] Block %2 thread with frame not executable
Lösung ansehen Code 10610
[Channel %1: ] Axis %2 not stopped
Lösung ansehen Code 10620
[Channel %1: ] Block %3 axis %2 at software limit switch %4
Lösung ansehen Code 10621
[Channel %1: ] Axis %2 rests on software limit switch %3%4
Lösung ansehen Code 10630
[Channel %1: ] Block %2 axis %3 at working area limit %4
Lösung ansehen Code 10631
[Channel %1: ] Axis %2 rest s at working area limit %3%4
Lösung ansehen Code 10632
[Channel %1: ] Block %2 axis %3 reaches the coordinate system-specific working area limit %4
Lösung ansehen Code 10633
[Channel %1: ] Axis %2 is at coordinate system-specific working area limit %3%4
Lösung ansehen Code 10634
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: The tool is not oriented parallel to the axis.
Lösung ansehen Code 10635
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: no milling or drilling tool.
Lösung ansehen Code 10636
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: Transformation is active.
Lösung ansehen Code 10637
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: Tool not active.
Lösung ansehen Code 10650
[Channel %1: ] Axis %2 incorrect gantry machine data, error code %3
Lösung ansehen Code 10651
[Channel %1: ] Gantry configuration error. Error code %2
Lösung ansehen Code 10652
[Channel %1: ] Axis %2 gantry warning threshold exceeded
Lösung ansehen Code 10653
[Channel %1: ] Axis %2 gantry error threshold exceeded
Lösung ansehen Code 10654
[Channel %1: ] Waiting for synchronization start of gantry group %2
Lösung ansehen Code 10655
[Channel %1: ] Synchronization of gantry group %2 in progress
Lösung ansehen Code 10656
[Channel %1: ] Axis %2 gantry slave axis dynamically overloaded
Lösung ansehen Code 10657
[Channel %1: ] Axis %2 power OFF in the gantry error limit exceeded status
Lösung ansehen Code 10658
[Channel %1: ] Axis %2 impermissible axis status %3.
Lösung ansehen Code 10700
[Channel %1: ] Block %2 NCK protection zone %3 violated during automatic or MDI mode
Lösung ansehen Code 10701
[Channel %1: ] Block %2 channel-specific protection zone %3 violated during automatic or MDI mode
Lösung ansehen Code 10702
[Channel %1: ] NCK protection zone %2 violated during manual mode
Lösung ansehen Code 10703
[Channel %1: ] Channel-specific protection zone %2 violated during manual mode
Lösung ansehen Code 10704
[Channel %1: ] Block %2 protection zone monitoring is not guaranteed
Lösung ansehen Code 10706
[Channel %1: ] NCK protection zone %2 reached with axis %3 during manual mode
Lösung ansehen Code 10707
[Channel %1: ] Channel-specific protection zone %2 reached with axis %3 during manual mode
Lösung ansehen Code 10710
[Channel %1: ] Block %2 conflict with centerless grinding
Lösung ansehen Code 10720
[Channel %1: ] Block %3 axis %2 software limit switch %4
Lösung ansehen Code 10721
[Channel %1: ] Block %3 axis %2 software limit switch %4
Lösung ansehen Code 10722
[Channel %1: ] Block %5 axis %2 software limit switch %6 violated, residual distance: %7 %3<ALUN> violated
Lösung ansehen Code 10723
[Channel %1: ] Block %5 axis %2 software limit switch %6 violated, residual distance: %7 %3<ALUN>
Lösung ansehen Code 10730
[Channel %1: ] Block %3 axis %2 working area limitation %4
Lösung ansehen Code 10731
[Channel %1: ] Block %3 axis %2 working area limitation %4
Lösung ansehen Code 10732
[Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>
Lösung ansehen Code 10733
[Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>
Lösung ansehen Code 10735
[Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>
Lösung ansehen Code 10736
[Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>
Lösung ansehen Code 10740
[Channel %1: ] Block %2 too many empty blocks in WAB programming
Lösung ansehen Code 10741
[Channel %1: ] Block %2 directi on reversal with WAB infeed motion
Lösung ansehen Code 10742
[Channel %1: ] Block %2 WAB distance invalid or not programmed
Lösung ansehen Code 10743
[Channel %1: ] Block %2 WAB programmed several times
Lösung ansehen Code 10744
[Channel %1: ] Block %2 no valid WAB direction defined
Lösung ansehen Code 10745
[Channel %1: ] Block %2 WAB end position not clear
Lösung ansehen Code 10746
[Channel %1: ] Block %2 block search stop for WAB
Lösung ansehen Code 10747
[Channel %1: ] Block %2 retraction direction not defined for WAB
Lösung ansehen Code 10748
[Channel %1: ] Block %2 illegal retract plane with WAB
Lösung ansehen Code 10750
[Channel %1: ] Block %2 tool radius compensation activated without tool number
Lösung ansehen Code 10751
[Channel %1: ] Block %2 danger of collision due to tool radius compensation
Lösung ansehen Code 10752
[Channel %1: ] Block %2 overflow of local block buffer with tool radius compensation
Lösung ansehen Code 10753
[Channel %1: ] Block %2 selection of the tool radius compensation only possible in linear block
Lösung ansehen Code 10754
[Channel %1: ] Block %2 deselection of the tool radius compensation only possible in linear block
Lösung ansehen Code 10755
[Channel %1: ] Block %2 selection of the tool radius compensation via KONT not possible at the current starting point
Lösung ansehen Code 10756
[Channel %1: ] Block %2 deselection of the tool radius compensation via KONT not possible at the programmed end point
Lösung ansehen Code 10757
[Channel %1: ] Block %2 changing the compensation plane while tool radius compensation is active not possible
Lösung ansehen Code 10758
[Channel %1: ] Block %2 curvature radius with variable compensation value too small
Lösung ansehen Code 10759
[Channel %1: ] Block %2 path is parallel to tool orientation
Lösung ansehen Code 10760
[Channel %1: ] Block %2 helical axis is not parallel to tool orientation
Lösung ansehen Code 10761
[Channel %1: ] Block %2 tool radius compensation for ellipse with more than one revolution not possible
Lösung ansehen Code 10762
[Channel %1: ] Block %2 too many empty blocks between two traversing blocks with active tool radius compensation
Lösung ansehen Code 10763
[Channel %1: ] Block %2 path component of the block in the compensation plane becomes zero
Lösung ansehen Code 10764
[Channel %1: ] Block %2 discontinuous path with active tool radius compensation
Lösung ansehen Code 10765
[Channel %1: ] Block %2 3D tool radius compensation not possible
Lösung ansehen Code 10766
[Channel %1: ] Illegal change of surface orientation between block %2 and block %3
Lösung ansehen Code 10767
[Channel %1: ] Block %2 processing with tilt angle unequal 0 not possible
Lösung ansehen Code 10768
[Channel %1: ] Block %2 illegal tool orientation with 3D tool radius compensation
Lösung ansehen Code 10769
[Channel %1: ] Block %2 Illegal surface normal vector with 3D tool radius compensation
Lösung ansehen Code 10770
[Channel %1: ] Block %2 change of corner type due to change of orientation with active tool radius compensation
Lösung ansehen Code 10771
[Channel %1: ] Block %2 overflow of local block buffer due to orientation smoothing
Lösung ansehen Code 10772
[Channel %1: ] Block %2 illegal orientation change when activating or deactivating 3D face cutting
Lösung ansehen Code 10773
[Channel %1: ] Illegal tool orientation in block %2 at inside corner with block %3
Lösung ansehen Code 10774
[Channel %1: ] Illegal tool dimensions with face cutting in block %2
Lösung ansehen Code 10775
[Channel %1: ] Illegal tool change with face cutting in block %2
Lösung ansehen Code 10776
[Channel %1: ] Block%2 axis %3 must be geometry axis if tool radius compensation is active
Lösung ansehen Code 10777
[Channel %1: ] Block %2 tool radius compensation: too many blocks with suppression of compensation
Lösung ansehen Code 10778
[Channel %1: ] Block %2 preprocessing stop with active tool radius compensation
Lösung ansehen Code 10779
[Channel %1: ] Block %2 preprocessing stop with active tool radius compensation
Lösung ansehen Code 10780
[Channel %1: ] Block %2 impermissible change of a turning or grinding tool with active tool radius compensation
Lösung ansehen Code 10781
[Channel %1: ] Block %2 illegal orientation of involute with tool radius compensation
Lösung ansehen Code 10782
[Channel %1: ] Block %2 illegal curve type with tool radius compensation
Lösung ansehen Code 10783
[Channel %1: ] Block %2 tool radius compensation type requires orientation transformation
Lösung ansehen Code 10784
[Channel %1: ] Block %2 illegal tool for tool radius compensation with constraint surface
Lösung ansehen Code 10790
[Channel %1: ] Block %2 plane change during linear programming with angles
Lösung ansehen Code 10791
[Channel %1: ] Block %2 invalid angle during linear programming
Lösung ansehen Code 10792
[Channel %1: ] Block %2 illegal interpolation type during linear programming with angles
Lösung ansehen Code 10793
[Channel %1: ] Block %2 second block missing during linear programming with angles
Lösung ansehen Code 10794
[Channel %1: ] Block %2 angle specification missing in 2nd block during linear interpolation with angles
Lösung ansehen Code 10795
[Channel %1: ] Block %2 end point specification during angle programming contradictory
Lösung ansehen Code 10800
[Channel %1: ] Block %3 axis %2 is not a geometry axis
Lösung ansehen Code 10805
[Channel %1: ] Block %2 repositioning after switch of geometry axes or transformation
Lösung ansehen Code 10810
[Channel %1: ] Block %2 master spindle not defined
Lösung ansehen Code 10820
[Channel %1: ] Rotary axis/spindle %2 not defined
Lösung ansehen Code 10860
[Channel %1: ] Block %2 feedrate not programmed
Lösung ansehen Code 10861
[Channel %1: ] Block %3 velocity of positioning axis %2 is zero
Lösung ansehen Code 10862
[Channel %1: ] Block %2 master spindle also used as path axis
Lösung ansehen Code 10865
[Channel %1 ] Block %2 FZ active, but no tool offset, tool %3
Lösung ansehen Code 10866
[Channel %1: ] Block %2 FZ is active, but the number of teeth of the active D number %4 of tool %3 is zero.
Lösung ansehen Code 10870
[Channel %1: ] Block %2 facing axis for constant velocity not defined
Lösung ansehen Code 10880
[Channel %1: ] Block %2 too many empty blocks between two traversing blocks when inserting chamfers or radii
Lösung ansehen Code 10881
[Channel %1: ] Block %2 overflow of local block buffer in the case of chamfers or radii
Lösung ansehen Code 10882
[Channel %1: ] Block %2 activation of chamfers or radii (non-modal) without traversing movement in the block
Lösung ansehen Code 10883
[Channel %1: ] Block %2 chamfer or fillet has to be reduced
Lösung ansehen Code 10890
[Channel %1: ] Block %2 overflow of local block buffer when calculating splines
Lösung ansehen Code 10891
[Channel %1: ] Block %2 multiplicity of node is greater than its order
Lösung ansehen Code 10900
[Channel %1: ] Block %2 no S value programmed for constant cutting speed
Lösung ansehen Code 10910
[Channel %1: ] Block %2 irregular velocity waveform of one path axis
Lösung ansehen Code 10911
[Channel %1: ] Block %2 transfo rmation prohibits to traverse the pole
Lösung ansehen Code 10912
[Channel %1: ] Block %2 preprocessing and main run might not be synchronized
Lösung ansehen Code 10913
[Channel %1: ] Block %2 negative feed profile is ignored
Lösung ansehen Code 10914
[Channel %1: ] Block %2: movement not possible while transformation active.
Lösung ansehen Code 10915
[Channel %1: ] Block %2 preparation problem in Look Ahead (module %3, identifier %4)
Lösung ansehen Code 10916
[Channel %1: ] Block %2 preparation problem in Look Ahead (module %3, identifier %4)
Lösung ansehen Code 10930
[Channel %1: ] Block %2 interpolation type not allowed in stock removal contour
Lösung ansehen Code 10931
[Channel %1: ] Block %2 incorrect stock removal contour
Lösung ansehen Code 10932
[Channel %1: ] Block %2 preparation of contour has been restarted
Lösung ansehen Code 10933
[Channel %1: ] Block %2 contour programm does not contain enough contour blocks
Lösung ansehen Code 10934
[Channel %1: ] Block %2 array for contour segmentation is set too small
Lösung ansehen Code 10940
[Channel %1: ] Block %2 curve table %3: delete/overwrite not possible
Lösung ansehen Code 10941
[Channel %1: ] Block %2: Curve table %3: NC SRAM memory full, type %4
Lösung ansehen Code 10942
[Channel %1: ] Block %2 curve table %3: ille gal instruction during definition
Lösung ansehen Code 10943
[Channel %1: ] Block %2 curve table %3: direction reversal of lead value in the block not allowed
Lösung ansehen Code 10944
[Channel %1: ] Block %2 cur ve table %3: illegal transformation
Lösung ansehen Code 10945
[Channel %1: ] Bloc k %2 curve table %3: illegal coupling of axes
Lösung ansehen Code 10946
[Channel %1: ] Block %2 curve table %3: no contour defined
Lösung ansehen Code 10947
[Channel %1: ] Block %2 curve table %3: contour not continuous
Lösung ansehen Code 10948
[Channel %1: ] Block %2 curve table %3: position jump at end of period
Lösung ansehen Code 10949
[Channel %1: ] Block %2 curve ta ble %3: missing master axis motion
Lösung ansehen Code 10950
[Channel %1: ] Calculation of arc length function too inaccurate
Lösung ansehen Code 10951
[Channel %1: ] Block %2 curve table %3: following value period is zero
Lösung ansehen Code 10955
[Channel %1: ] Block %2 curve ta ble %3: missing master axis motion
Lösung ansehen Code 10956
[Channel %1: ] Block %2 curve table %3: NC me mory limit DRAM reached type %4.
Lösung ansehen Code 10958
[Channel %1: ] Lin. curve table %2, memory type %3 includes %4 polynomial segments.
Lösung ansehen Code 10960
[Channel %1: ] Block %2 COMPCURV/COMPCAD and radius compensation can-notbe used simultaneously
Lösung ansehen Code 10961
[Channel %1: ] Block %2 maximum cubic polynomials are allowed on active radius compensation.
Lösung ansehen Code 10962
[Channel %1: ] Block %2 function %3 not possible with path correction
Lösung ansehen Code 10970
[Channel %1: ] Block %2 continuous-path mode active during punching
Lösung ansehen Code 10980
[Channel %1: ] Block %2 orie ntation smoothing not possible
Lösung ansehen Code 10982
[Channel %1: ] Block %2 orient ation smoothing not possible with ORISON
Lösung ansehen Code 12000
[Channel %1: ] Block %2 address %3 programmed repeatedly
Lösung ansehen Code 12010
[Channel %1: ] Block %2 address %3 address type programmed too often
Lösung ansehen Code 12020
[Channel %1: ] Block %2 illegal address modification
Lösung ansehen Code 12030
[Channel %1: ] Block %2 invalid parameter or data type in %3
Lösung ansehen Code 12040
[Channel %1: ] Block %2 expression %3 is not of data type 'AXIS'
Lösung ansehen Code 12050
[Channel %1: ] Block %2 DIN address %3 not configured
Lösung ansehen Code 12060
[Channel %1: ] Block %2 same G group programmed repeatedly
Lösung ansehen Code 12070
[Channel %1: ] Block %2 too many syntax-defining G functions
Lösung ansehen Code 12080
[Channel %1: ] Block %2 syntax error in text %3
Lösung ansehen Code 12090
[Channel %1: ] Block %2 unexpected parameter %3
Lösung ansehen Code 12100
[Channel %1: ] Block %2 number of passes %3 not permissible
Lösung ansehen