Zurück zu allen Siemens Modellen Search all database
Siemens SINUMERIK 840D CNC
Siemens SINUMERIK 840D CNC Fehlercodes
Vollständige Alarm- und Fehlercode-Referenz für die Siemens SINUMERIK 840D CNC. Durchsuchen Sie unten alle 4014 dokumentierten Fehlercodes, die jeweils zu einer detaillierten Anleitung zur Fehlerbehebung führen.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Vollständige Alarmliste (Page 5 of 21)
Code 16678
[Channel %1: ] Block %2 following axis/spindle %3 status %4 impermissible traversing instruction
Lösung ansehen Code 16680
[Channel %1: ] Block %2 following axis/spindle %4 instruction %3 programmed repeatedly
Lösung ansehen Code 16681
[Channel %1: ] Block %2 following axis/spindle %3 CPFPOS not permitted (reason %4)
Lösung ansehen Code 16682
[Channel %1: ] Block %2 following axis/spindle %3 instructions %4 are not possible.
Lösung ansehen Code 16684
[Channel %1: ] Block %2 following axis/spindle %3 instructions %4 are not possible separately.
Lösung ansehen Code 16685
[Channel %1: ] Block %2 following axis/spindle %3 instructions %4 are not possible separately.
Lösung ansehen Code 16686
[Channel %1: ] Block %2 following axis/spindle %3 type of coupling/instruction %4 is not possible.
Lösung ansehen Code 16687
[Channel %1: ] Block %2 following axis/spindle %3 type of coupling/instruction %4 is not possible.
Lösung ansehen Code 16688
[Channel %1: ] Block %2 following axis/spindle %3 coupling type %4 maximum number of master values exceeded
Lösung ansehen Code 16689
[Channel %1: ] Block %2 following axis/spindle %3 coupling type %4 maximum number of master values exceeded
Lösung ansehen Code 16690
[Channel %1: ] Block %2 following axis/spindle %3 changing the reference system %4 is not possible.
Lösung ansehen Code 16691
[Channel %1: ] Block %2 following axis/spindle %3 changing the reference system %4 is not possible.
Lösung ansehen Code 16692
[Channel %1: ] Block %2 following axis/spindle %3 maximum number of couplings in the block %4 has been exceeded
Lösung ansehen Code 16694
[Channel %1: ] Block %2 following axis/spindle %3 status/instruction %4 is not possible.
Lösung ansehen Code 16695
[Channel %1: ] Block %2 following axis/spindle %3 status/instruction %4 is not possible.
Lösung ansehen Code 16696
[Channel %1: ] Block %2 following axis/spindle %3 coupling has not been defined.
Lösung ansehen Code 16697
[Channel %1: ] Block %2 following axis/spindle %3 coupling has not been defined.
Lösung ansehen Code 16698
[Channel %1: ] Block %2 following axis/spindle %3 leading axis/spindle %4 has not been defined.
Lösung ansehen Code 16699
[Channel %1: ] Block %2 following axis/spindle %3 leading axis/spindle %4 has not been defined.
Lösung ansehen Code 16700
[Channel %1: ] Block %2 axis %3 invalid feed type
Lösung ansehen Code 16710
[Channel %1: ] Block %2 axis %3 master spindle not programmed
Lösung ansehen Code 16715
[Channel %1: ] Block %2 axis %3 spindle not in standstill
Lösung ansehen Code 16720
[Channel %1: ] Block %2 axis %3 thread pitch is zero
Lösung ansehen Code 16730
[Channel %1: ] Block %2 axis %3 wrong parameter
Lösung ansehen Code 16740
[Channel %1: ] Block %2 no geometry axis programmed
Lösung ansehen Code 16746
[Channel %1: ] Block %2 spindle %3 selected gear stage %4 not installed
Lösung ansehen Code 16747
[Channel %1: ] Block %2 spindle %3 inserted gear stage %4 for tapping not installed
Lösung ansehen Code 16748
[Channel %1: ] Block %2 spindle %3 gear stage %4 expected
Lösung ansehen Code 16750
[Channel %1: ] Block %2 axis %3 SPCON not programmed
Lösung ansehen Code 16751
[Channel %1: ] Block %2 spindle/axis %3 SPCOF not executable
Lösung ansehen Code 16755
[Channel %1: ] Block %2 no stop required
Lösung ansehen Code 16757
[Channel %1: ] Block %2 for following spindle %3 coupling as leading spindle/axis already existing
Lösung ansehen Code 16758
[Channel %1: ] Block %2 for leading spindle %3 coupling as following spindle/axis already existing
Lösung ansehen Code 16760
[Channel %1: ] Block %2 axis %3 S value missing
Lösung ansehen Code 16761
[Channel %1: ] Block %2 axis/spindle %3 not programmable in the channel
Lösung ansehen Code 16762
[Channel %1: ] Block %2 spindle %3 thread function is active
Lösung ansehen Code 16763
[Channel %1: ] Block %2 axis %3 programmed speed is illegal (zero or negative)
Lösung ansehen Code 16770
[Channel %1: ] Block %2 axis %3 no measuring system available
Lösung ansehen Code 16771
[Channel %1: ] Block %3 following axis %2 overlaid movement not enabled
Lösung ansehen Code 16772
[Channel %1: ] Block %2 axis %3 is the slave axis, the coupling is being opened
Lösung ansehen Code 16773
[Channel %1: ] Axis %2 is the follow ing axis. The axis/spindle disables of leading axes %3 and %4 differ from one another.
Lösung ansehen Code 16774
[Channel %1: ] Synchronization aborted for slave axis/spindle %2
Lösung ansehen Code 16776
[Channel %1: ] Block %2 curve table %3 does not exist for axis %4
Lösung ansehen Code 16777
[Channel %1: ] Block %2 coupling: following axis %3 for lead axis %4 not available
Lösung ansehen Code 16778
[Channel %1: ] Block %2 coupling: Ring coupling at following axis %3 and leading axis %4 impermissible
Lösung ansehen Code 16779
[Channel %1: ] Block %2 coupling: too many couplings for axis %3, see active leading axis %4
Lösung ansehen Code 16780
[Channel %1: ] Block %2 fo llowing spindle/axis missing
Lösung ansehen Code 16781
[Channel %1: ] Block %2 m aster spindle/axis missing
Lösung ansehen Code 16782
[Channel %1: ] Block %2 followin g spindle/axis %3 not available
Lösung ansehen Code 16783
[Channel %1: ] Block %2 master spindle/axis %3 not available
Lösung ansehen Code 16785
[Channel %1: ] Block %2 identical spindles/axes %3
Lösung ansehen Code 16786
[Channel %1: ] Block %2 coupling to master spindle %3 already exists
Lösung ansehen Code 16787
[Channel %1: ] Block %2 coupling parameter not changeable
Lösung ansehen Code 16788
[Channel %1: ] Block %2 cyclic coupling
Lösung ansehen Code 16789
[Channel %1: ] Block %2 multiple link
Lösung ansehen Code 16790
[Channel %1: ] Block %2 Pa rameter is zero or missing
Lösung ansehen Code 16791
[Channel %1: ] Block %2 parameter is not relevant
Lösung ansehen Code 16792
[Channel %1: ] Block %2 too many couplings for axis/spindle %3
Lösung ansehen Code 16793
[Channel %1: ] Block %2 coupling of axis %3 prohibits transformation change
Lösung ansehen Code 16794
[Channel %1: ] Block %2 coupling of axis/spindle %3 prohibits reference point approach
Lösung ansehen Code 16795
[Channel %1: ] Block %2 string cannot be interpreted
Lösung ansehen Code 16796
[Channel %1: ] Block %2 coupling not defined
Lösung ansehen Code 16797
[Channel %1: ] Block %2 coupling is active
Lösung ansehen Code 16798
[Channel %1: ] Block %2 axis %3 is following axis and prohibits axis container rotation
Lösung ansehen Code 16799
[Channel %1: ] Block %2 axis %3 is master axis and prohibits axis container rotation
Lösung ansehen Code 16800
[Channel %1: ] Block %2 traverse instruction DC/CDC for axis %3 not allowed
Lösung ansehen Code 16810
[Channel %1: ] Block %2 traverse instruction ACP for axis %3 not allowed
Lösung ansehen Code 16820
[Channel %1: ] Block %2 traverse instruction ACN for axis %3 not allowed
Lösung ansehen Code 16830
[Channel %1: ] Block %2 incorrect position programmed for axis/spindle %3
Lösung ansehen Code 16903
[Channel %1: ] Program control: action %2<ALNX> not allowed in the current state
Lösung ansehen Code 16904
[Channel %1: ] Program control: action %2<ALNX> not allowed in the current state
Lösung ansehen Code 16905
[Channel %1: ] Program control: action %2<ALNX> not allowed
Lösung ansehen Code 16906
[Channel %1: ] Program control: action %2<ALNX> is aborted due to an alarm
Lösung ansehen Code 16907
[Channel %1: ] Action %2<ALNX> only possible in stop state
Lösung ansehen Code 16908
[Channel %1: ] Action %2<ALNX> only possible in reset state or at the block end
Lösung ansehen Code 16909
[Channel %1: ] Action %2<ALNX> not allowed in current mode
Lösung ansehen Code 16911
[Channel %1: ] Mode change is not allowed
Lösung ansehen Code 16912
[Channel %1: ] Program control: action %2<ALNX> only possible in reset state
Lösung ansehen Code 16913
[Mode group %1: ] [Channel %2: ] Mode change: action %3<ALNX> not allowed
Lösung ansehen Code 16914
[Mode group %1: ] [Channel %2: ] Mode change: action %3<ALNX> not allowed
Lösung ansehen Code 16915
[Channel %1: ] Action %2<ALNX> not allowed in the current block
Lösung ansehen Code 16916
[Channel %1: ] Repositioning: action %2<ALNX> not allowed in the current state
Lösung ansehen Code 16918
[Channel %1: ] For action %2<ALNX> all channels must be in reset state
Lösung ansehen Code 16919
[Channel %1: ] Action %2<ALNX> is not allowed due to a pending alarm
Lösung ansehen Code 16920
[Channel %1: ] Action %2<ALNX> is already active
Lösung ansehen Code 16921
[Mode group %2: ] [Channel %1: ] Machine data: channel/mode group assignment not allowed or assigned twice
Lösung ansehen Code 16922
[Channel %1: ] Subprograms: acti on %2<ALNX> maximum nesting depth exceeded
Lösung ansehen Code 16923
[Channel %1: ] Program control: action %2<ALNX> not allowed in the current state
Lösung ansehen Code 16924
[Channel %1: ] Caution: program test modifies tool management data
Lösung ansehen Code 16925
[Channel %1: ] Program control: action %2<ALNX> not allowed in the current state, action %3<ALNX> active
Lösung ansehen Code 16926
[Channel %1: ] Channel coordination: action %2 not allowed in block %3, marker %4 is already set
Lösung ansehen Code 16927
[Channel %1: ] Action %2<ALNX> at active interrupt treatment not allowed
Lösung ansehen Code 16928
[Channel %1: ] Interrupt treatment: action %2<ALNX> not possible
Lösung ansehen Code 16930
[Channel %1: ] Preceding block and current block %2 must be separated through an executable block
Lösung ansehen Code 16931
[Channel %1: ] Subprograms: acti on %2<ALNX> maximum nesting depth exceeded
Lösung ansehen Code 16932
[Channel %1: ] Conflict when activating user data type %2
Lösung ansehen Code 16933
[Channel %1: ] Interrupt treatment: action %2<ALNX> not allowed in the current state
Lösung ansehen Code 16934
[Channel %1: ] Interrupt treatment: action %2<ALNX> not possible due to stop
Lösung ansehen Code 16935
[Channel %1: ] Action %2<ALNX> not possible due to search run
Lösung ansehen Code 16936
[Channel %1: ] Action %2<ALNX> not possible due to active dry run
Lösung ansehen Code 16937
[Channel %1: ] Action %2<ALNX> not possible due to program test
Lösung ansehen Code 16938
[Channel %1: ] Action %2<ALNX> aborted due to active gear change
Lösung ansehen Code 16939
[Channel %1: ] Action %2<ALNX> rejected due to active gear change
Lösung ansehen Code 16940
[Channel %1: ] Action %2<ALNX> wait for gear change
Lösung ansehen Code 16941
[Channel %1: ] Action %2<ALNX> rejected because no program event has been executed yet
Lösung ansehen Code 16942
[Channel %1: ] Start program command action %2<ALNX> not possible
Lösung ansehen Code 16943
[Channel %1: ] Action %2<A LNX> not possible due to ASUP
Lösung ansehen Code 16944
[Channel %1: ] Action %2<ALNX> not possible due to active search blocks
Lösung ansehen Code 16945
[Channel %1: ] Action %2<ALNX> delayed up to the block end
Lösung ansehen Code 16946
[Channel %1: ] Start via START is not allowed
Lösung ansehen Code 16947
[Channel %1: ] Start via PLC is not allowed
Lösung ansehen Code 16948
Channel %1 dependent channel %2 still active
Lösung ansehen Code 16949
Correspondence between marker of channel %1 and channel %2 is invalid.
Lösung ansehen Code 16950
[Channel %1: ] Search run with hold block
Lösung ansehen Code 16951
[Channel %1: ] Search run in a protected program section.
Lösung ansehen Code 16952
[Channel %1: ] Start program command not possible due to MDI
Lösung ansehen Code 16953
[Channel %1: ] For slave axis %2 SERUPRO not allowed, as master axis %3 not subject to axis/spindle disable
Lösung ansehen Code 16954
[Channel %1: ] Block %2 programmed stop prohibited in stop delay area
Lösung ansehen Code 16955
[Channel %1: ] Stop in stop delay area is delayed
Lösung ansehen Code 16956
[Channel %1: ] Program %2 cannot be started due to global start disable.
Lösung ansehen Code 16957
[Channel %1: ] Stop-Delay area is suppressed
Lösung ansehen Code 16959
[Channel %1: ] Action %2<ALNX> prohibited during simulation block search.
Lösung ansehen Code 16960
[Channel %1: ] Ac tion %2<ALNX> prohi bited during EXECUTE PROGRAM AREA.
Lösung ansehen Code 16961
[Channel %1: ] Action %2<ALNX> prohibited during syntax check.
Lösung ansehen Code 16962
[Channel %1: ] NCK computing time reduced, start is not allowed.
Lösung ansehen Code 17000
[Channel %1: ] Block %2 maximum number of symbols exceeded
Lösung ansehen Code 17001
[Channel %1: ] Block %2 no memory left for tool/magazine data
Lösung ansehen Code 17010
[Channel %1: ] Block %2 no memory left
Lösung ansehen Code 17018
[Channel %1: ] Block %2 incorrect value for parameter %3
Lösung ansehen Code 17020
[Channel %1: ] Block %2 illegal array index 1
Lösung ansehen Code 17030
[Channel %1: ] Block %2 illegal array index 2
Lösung ansehen Code 17035
[Channel %1: ] Block %2 illegal array index 1
Lösung ansehen Code 17040
[Channel %1: ] Block %2 illegal axis index
Lösung ansehen Code 17050
[Channel %1: ] Block %2 illegal value
Lösung ansehen Code 17055
[Channel %1: ] Block %2 GUD variable not existing
Lösung ansehen Code 17060
[Channel %1: ] Block %2 requested data area too large
Lösung ansehen Code 17070
[Channel %1: ] Block %2 data is write-protected
Lösung ansehen Code 17080
[Channel %1: ] Block %2 %3 value below lower limit
Lösung ansehen Code 17090
[Channel %1: ] Block %2 %3 value exceeds upper limit
Lösung ansehen Code 17095
[Channel %1: ] Block %2 invalid value
Lösung ansehen Code 17100
[Channel %1: ] Block %2 digital i nput/comparator no. %3 not activated
Lösung ansehen Code 17110
[Channel %1: ] Block %2 digi tal output no. %3 not activated
Lösung ansehen Code 17120
[Channel %1: ] Block %2 analog input no. %3 not activated
Lösung ansehen Code 17130
[Channel %1: ] Block %2 analog output no. %3 not activated
Lösung ansehen Code 17140
[Channel %1: ] Block %2 NCK output %3 is assigned to a function via machine data
Lösung ansehen Code 17150
[Channel %1: ] Block %2 maximum of %3 NCK outputs programmable in the block
Lösung ansehen Code 17160
[Channel %1: ] Block %2 no tool selected
Lösung ansehen Code 17170
[Channel %1: ] Block %2 number of symbols too large
Lösung ansehen Code 17180
[Channel %1: ] Block %2 illegal D number
Lösung ansehen Code 17181
[Channel %1: ] Block %2 T no.= %3, D no.= %4 not existing
Lösung ansehen Code 17182
[Channel %1: ] Block %2 illegal sum correction number
Lösung ansehen Code 17183
[Channel %1: ] Block %2 H number al ready available in T no.= %3, D no.= %4
Lösung ansehen Code 17188
[Channel %1: ] D number %2 defined in tool T no. %3 and %4
Lösung ansehen Code 17189
[Channel %1: ] D number %2 of tools defined on magazine/location %3 and %4
Lösung ansehen Code 17190
[Channel %1: ] Block %2 illegal T number %3
Lösung ansehen Code 17191
[Channel %1: ] Block %2 T= %3 not existing, program %4
Lösung ansehen Code 17192
[TO unit %1: ] Invalid tool designa tion of '%2', duplo no. %3. No more replacement tools possible in '%4'.
Lösung ansehen Code 17193
[Channel %1: ] Block %2 the acti ve tool is no longer on toolholder no./spindle no. %3, program %4
Lösung ansehen Code 17194
[Channel %1: ] Block %2 no suitable tool found
Lösung ansehen Code 17195
Channel %1 block %2 illegal tool holder number %3
Lösung ansehen Code 17200
[Channel %1: ] Block %2: Data of tool %3 cannot be deleted.
Lösung ansehen Code 17202
[Channel %1: ] Block %2 deleting magazine data not possible
Lösung ansehen Code 17210
[Channel %1: ] Block %2 access to variable not possible
Lösung ansehen Code 17212
[Channel %1: ] Tool management: Load manual tool %3, duplo no. %2 onto spindle/toolholder %4
Lösung ansehen Code 17214
[Channel %1: ] Tool management: remove manual tool %3 from spindle/toolholder %2
Lösung ansehen Code 17216
[Channel %1: ] Remove manual tool from toolholder %4 and load manual tool %3 %2
Lösung ansehen Code 17220
[Channel %1: ] Block %2 tool not existing
Lösung ansehen Code 17224
[Channel %1: ] Block %2 tool T/D= %3 - tool type %4 is not permitted
Lösung ansehen Code 17230
[Channel %1: ] Block %2 Duplo no. already assigned
Lösung ansehen Code 17240
[Channel %1: ] Block %2 illegal tool definition
Lösung ansehen Code 17250
[Channel %1: ] Block %2 illegal magazine definition
Lösung ansehen Code 17260
[Channel %1: ] Block %2 illegal magazine location definition
Lösung ansehen Code 17262
[Channel %1: ] Block %2 illegal tool adapter operation
Lösung ansehen Code 17270
[Channel %1: ] Block %2 call-by-reference: illegal variable
Lösung ansehen Code 17500
[Channel %1: ] Block %2 axis %3 is not an indexing axis
Lösung ansehen Code 17501
[Channel %1: ] Block %2 indexing axis %3 with Hirth tool system is active
Lösung ansehen Code 17502
[Channel %1: ] Block %2 indexing axis %3 with Hirth tooth system stop is delayed
Lösung ansehen Code 17503
[Channel %1: ] Block %2 indexing axis %3 with Hirth tooth system and axis not referenced
Lösung ansehen Code 17510
[Channel %1: ] Block %2 invalid index for indexing axis %3
Lösung ansehen Code 17600
[Channel %1: ] Block %2 preset on transformed axis %3 not possible
Lösung ansehen Code 17605
[Channel %1: ] Block %2 axis %3 transformation active: inhibits rotation of axis container
Lösung ansehen Code 17610
[Channel %1: ] Block %2 axis %3 in volved in the transformation, action cannot be carried out
Lösung ansehen Code 17620
[Channel %1: ] Block %2 approaching fixed point for transformed axis %3 not possible
Lösung ansehen Code 17630
[Channel %1: ] Block %2 referencing for transformed axis %3 not possible
Lösung ansehen Code 17640
[Channel %1: ] Block %2 spindle operation for transformed axis %3 not possible
Lösung ansehen Code 17650
[Channel %1: ] Block %2 machine axis %3 not programmable
Lösung ansehen Code 17800
[Channel %1: ] Block %2 illegally coded position programmed
Lösung ansehen Code 17810
[Channel %1: ] Axis %2 not referenced
Lösung ansehen Code 17811
[Channel %1: ] Fixed-point approach not possible for axis %2 in JOG, reason %3
Lösung ansehen Code 17812
[Channel %1: ] Axis %2 fixed-point approach in JOG: Fixed point %3 changed
Lösung ansehen Code 17813
[Channel %1: ] Axis %2 fixed-point approach in JOG and override motion active
Lösung ansehen Code 17814
[Channel %1: ] Axis %2 fixed-point position not available
Lösung ansehen Code 17815
Indexing axis %1 fixed point %2 unequal indexing position
Lösung ansehen Code 17820
[Channel %1: ] JOG to position not possible for axis %2, reason %3
Lösung ansehen Code 17821
[Channel %1: ] Axis %2 JOG to position and override motion active
Lösung ansehen Code 17822
[Channel %1: ] Axis %2 JOG to position: Position changed
Lösung ansehen Code 17823
[Channel %1: ] Axis %2 JOG to position deactivated
Lösung ansehen Code 17825
Indexing axis %1 $SA_JOG_POSI TION unequal indexing position
Lösung ansehen Code 17830
[Channel %1: ] JOG in a circle is activated, but the axis %2 required for this is not a geometry axis.
Lösung ansehen Code 17831
[Channel %1: ] JOG a circle is not possible, reason %2
Lösung ansehen