Siemens SINUMERIK 840D CNC 错误代码

<location>Drive encoder: Configuration position tracking

<location>Measuring gear: Positi on tracking, maximum actual value exceeded

<location>Encoder 1: Reference point coordinate not in the permissible range

<location>Encoder 2: Reference point coordinate not in the permissible range

<location>Encoder 3: Reference point coordinate not in the permissible range

<location>Drive encoder: Number of pulses is not to the power of two

<location>Drive encoder: Number of multiturn pulses is not to the power of two

<location>Drive, encoder: Positi on tracking, incremental encoder not possible

<location>Drive: Encoder error in PROFIdrive encoder interface 1

<location>Drive: Encoder error in PROFIdrive encoder interface 2

<location>Drive: Encoder error in PROFIdrive encoder interface 3

<location>Encoder could not be identified

<location>Drive: Motor encoder not ready

<location>Drive: Encoderless operation due to a fault active

<location>Encoder 1: Measuring probe evaluation not possible

<location>Encoder 2: Measuring probe evaluation not possible

<location>Encoder 3: Measuring probe evaluation not possible

<location>Drive: No Sensor Module with matching component number

<location>Encoder 1: Position actual value preprocessing error

<location>Encoder 2: Position actual value preprocessing error

<location>Encoder 3: Position actual value preprocessing error

<location>Encoder 1: Posi tion setting value activated

<location>Encoder 2: Posi tion setting value activated

<location>Encoder 3: Posi tion setting value activated

<location>Encoder 1: Position actual value preprocessing does not have a valid encoder

<location>Encoder 2: Position actual value preprocessing does not have a valid encoder

<location>Encoder 3: Position actual value preprocessing does not have a valid encoder

<location>Encoder 1: Drive Data Set changeover in operation

<location>Encoder 2: Drive Data Set changeover in operation

<location>Encoder 3: Drive Data Set changeover in operation

<location>Encoder 1: Value range for position actual value exceeded

<location>Encoder 2: Value range for position actual value exceeded

<location>Encoder 3: Value range for position actual value exceeded

<location>Encoder 1: Reference function interrupted

<location>Encoder 2: Reference function interrupted

<location>Encoder 3: Reference function interrupted

<location>Encoder 1: Adjustment not possible

<location>Encoder 2: Adjustment not possible

<location>Encoder 3: Adjustment not possible

<location>Drive: No power unit present

<location>Drive: Motor overcurrent

<location>Drive: Infeed or power unit not ready

<location>Infeed: Power unit overload I2t

<locati on>Drive: Power unit EEPR OM without rated data

<location>Drive: Power unit has been changed

<location>Drive: Temperature sensor not connected

<location>Drive: Simulation mode activated

<location>Drive: Simulation mode with DC link voltage too high

<location>Drive: Infeed operation missing

<location>Drive: Infeed operation withdrawn

<location>External alarm 1

<location>External alarm 2

<location>External alarm 3

<location>External fault 1

<location>External fault 2

<location>External fault 3

<location>Internal voltage protection/internal armature short-circuit with Safe Torque Off active

<location>Drive: Motor locked/speed controller at its limit

<location>Drive: Motor overspeed

<location>Drive: Motor stalled

<location>Drive: Motor speed deviation

<location>External armature shor t-circuit: Contactor feedback signal "Closed" missing

<location>External armature shor t-circuit: Contactor feedback signal "Open" missing

<location>Armature short-circui t / internal voltage protection: Parameterization error

<location>Internal armature short-circuit: Motor terminals are not at zero potential after pulse suppression

<location>Internal armature short-circuit active

<location>Internal voltage protecti on: De-activation only effective after POWER ON

<location>Drive: Motor overtemperature

<location>Excitation current outside the tolerance range

<location>Flux out of tolerance

<location>Three-phase setpoint generator operation selected/active

<location>Drive: Torque too low

<location>Drive: Torque too high

<location>Drive: Torque outside the tolerance

<location>Drive: Torque too low

<location>Drive: Torque too high

<location>Drive: Torque outside the tolerance

<location>Drive: Envelope curve, parameter invalid

<location>DC brake active

<location>Internal voltage protection initiated

<location>Drive: Brake control error

<location>Brake does not open

<location>Brake does not close

<location>Drv: Motor holding brake detected

<location>Sync-line-drive: Synchronization error

<location>Sync-line-drive: Target frequency not permissible

<location>Sync-line-drive: Setpoint frequency is completely different than the target frequency

<location>Sync-line-drive: Synchronization not permitted

<location>Drive: Incorrect motor parameter

<location>Drive: Motor has been changed

<location>Drive: Motor code does not match the list (catalog) motor

<location>Drive: Incorrect friction characteristic

<location>Drive: Friction ch aracteristic record activated

<location>Drive: Friction characteristic record interrupted

<location>Drive: Save required

<location>Drive: Check the commutation angle

<location>Drive: Automatic encoder adjustment incorrect

<location>Drive: Lq-Ld measurement incorrect

<location>Drive: Incorrect pole position identification

<location>Drive: Automatic encoder adjustment incorrect

<location>Drive: Angular commutation offset determination activated

<location>Drive: Rotating measurement activated

<location>Drive: Enable signals for the rotating measurement missing

<location>Drive: Rotating measurement encoder test

<location>Drive: Rotating measurement saturation characteristic

<location>Drive: Speed controller optimization, mo ment of inertia

<location>Drive: Speed controller optimization (oscillation test)

<location>Drive: Rotating measurement ramp-function generator

<location>Drive: Rotating measurement, no encoder available

<location>Drive: Rotating measurement, no configuration selected

<location>Drive: Rotating measurement leakage inductance (q-axis)

<location>Drive: Incorrect motor data identification

<location>Drive: Motor data identification activated

<location>Drive: Incorrect direction of rotation of the field or encoder actual value inversion

<location>Drive: Pole posi tion identification not successful

<location>Drive: Pole position identification routine not carried out

<location>Drive: Motor data identification active on another drive

<location>Drive: Motor data identification cannot be activated

<location>TB: +/-15 V power supply faulted

<location>TB: Anal og-digital converter

<location>COMM BOARD: Monitori ng time configuration expired

<location>COMM BOARD: Monitori ng time process data expired

<location>COMM BOARD: Monito ring time sign-of-life expired

<location>COMM BOARD: Internal cyclic data transfer error

<location>COMM BOARD: Send configuration data invalid

<location>COMM BOARD: Receive configuration data invalid

<location>COMM BOARD: Non-cyclic channel error

<location>COMM BOARD: No cyclic connection

<location>COMM BOARD: Message channel error

<location>PZD Interface Hardware assignment error

<location>CBC: Communications error

<location>CBC: NMT state change

<location>CBC: Telegram loss

<location>CBC: Error counter for error passive exceeded

<location>CBC: Message buffer overflow

<location>CBC: Incorrect communications mode

<location>CBC: Obj cannot be mapped

<location>CBC: Number of mapped bytes exceeded

<location>CBC: Set COB-ID invalid

<location>CBC: Number of PDO channels too low

<location>CBC: PDO COB-ID already available

<location>License not adequate

<location>Error in license checksum

<location>Power unit: Overcurrent

<location>Power unit: DC link voltage, overvoltage

<location>Power unit: DC link voltage, undervoltage

<location>Power unit: Overtemperature heat sink AC inverter

<location>Power unit: Overload I2t

<location>Power unit: Thyristor Control Board

<location>Power unit: Sign-of-life error cyclic data

<location>Power unit: Sign-of-life error cyclic data

<location>Power unit: Line phase failure in main circuit

<location>Power unit: Temperature sensor heat sink wire breakage

<location>Power unit: Temperature sensor heat sink short-circuit

<location>Power unit: Load supply switched out

<location>Power unit: Hardware current limit has responded too often

<location>Power unit: Co nfiguration not supported

<location>Power unit: Ground fault

<location>Power unit: Monitoring V_ce

<location>Power unit: Overtemperature thermal model alarm

<location>Power unit: Overtemperature thermal model

<location>Power unit: Chip overtemperature

<location>Power unit: Prec harging DC link time monitoring

<location>Power unit: Hard ware current li miting, phase U

<location>Power unit: Hard ware current li miting, phase V

<location>Power unit: Hard ware current li miting, phase W

<location>Power unit: Air intake overtemperature

<location>Power unit: Elec tronics board overtemperature

<location>Power unit: Rectifier overtemperature

<location>Power unit: Capacitor fan monitoring

<location>Power unit: Failure capacitor fan

<location>Power unit: Undervolt 24 V

<location>Power unit: Undervoltage 24 V alarm

<location>Power unit: Fan operating time reached or exceeded

<location>Power unit: Overvolt 24 V

<location>Power unit: Overvoltage 24 V alarm

<location>Power unit: Supply undervoltage

<location>Power unit: Undervoltage, alarm

<location>Cooling system: Cooling medium flow rate too low

<location>Power unit: Supply overvoltage

<location>EEPROM data error

<location>The bypass contactor was opened under current

<location>Cycle requested by the power unit module not supported

<location>No new actual values received from the power unit module

<location>Setpoints are no longer being transferred to the power unit

<location>Actual value/setpoint preprocessing no longer synchronous to DRIVE-CLiQ

<location>Communications er ror to the power unit module

<location>PU: Actual value sensing fault

<location>Power unit: DC link voltage, overvoltage

<location>SI MM: STOP A initiated

<location>SI MM: Defect in a monitoring channel

<location>SI MM: Safe Torque Off active

<location>SI MM: Safe Stop 1 active

<location>SI MM: Sign-of-life error in safety data

<location>SI MM: Brake control error

<location>SI MM: Fault in the shutdown path of the second channel

<location>SI MM: Internal software error

<location>SI MM: Acceptance test required

<location>SI MM: Synchronization with Control Unit unsuccessful

<location>SI MM: Illegal monitoring clock cycle