Back to all Siemens models Search all database
Siemens SINUMERIK 840D CNC
Siemens SINUMERIK 840D CNC Error Codes
Complete alarm and error code reference for the Siemens SINUMERIK 840D CNC. Browse all 4014 documented fault codes below, each linking to a detailed troubleshooting guide.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Complete Alarm List (Page 2 of 21)
Code 7201
Assertion error in %1 line %2
View solution Code 7202
Missing option bit for %1: %2 <hex>
View solution Code 7205
[Channel %1: ] Incompatible OEM transformation version NCK %2 CC %3
View solution Code 7300
Problem with externally linked COA application %1 Index: %2 Additional information: %3
View solution Code 7301
Assertion error in %1 line %2
View solution Code 7500
Block %1 invalid protection level for command %2 (protection level act.: %3 prog.: %4)
View solution Code 8000
[Channel %1: ] Option 'Interrupt routines' not set
View solution Code 8010
Option 'activation of more than %1 axes' not set
View solution Code 8020
Option 'activation of more than %1 channels' not set
View solution Code 8021
Option 'activation of more than %1 mode groups' not set
View solution Code 8022
Option 'activation of more than %1KB SRAM' not set
View solution Code 8023
Option 'Activation of more than %1 KB PLC user memory' not set
View solution Code 8024
Option 'Activation of more than %1 magazines' not set
View solution Code 8030
[Channel %1: ] Block %2 option 'interpolation of more than %3 axes' not set
View solution Code 8031
[Channel %1: ] Block %2 axis %3: Axis has no IPO functionality
View solution Code 8032
Option 'activation of more than %1 link axes' not set
View solution Code 8034
Option 'activation of axis containers' not set
View solution Code 8036
Option: it is not allo wed to set different IPO cycles or position control cycles with NCU link.
View solution Code 8037
'Activate APC/Number of curren t setpoint filters' option not set.
View solution Code 8038
Option 'activation of more than %1 lead link axes' not set
View solution Code 8040
Machine data %1 reset, corresponding option is not set
View solution Code 8041
Axis %1: MD %2 reset, corresponding option not sufficient
View solution Code 8044
Option for IPO cycle time %1 ms not set
View solution Code 8050
Option 'SPL inputs/outputs' not set.
View solution Code 8051
Option 'Handwheel on PROFIBUS' not set
View solution Code 8080
%1 option(s) is/are activated without setting the license key
View solution Code 8081
%1 option(s) is/are activated that are not licensed by the license key
View solution Code 8082
A wrong license key was entered three times, Power On required before next try.
View solution Code 8088
'Selection of non-grinding-specific tools' option not possible
View solution Code 8098
Invalid combination of options (%1)
View solution Code 8100
[Channel %1: ] Block %2: function not possible
View solution Code 8101
Option for collision avoidance is inadequate
View solution Code 8120
[Channel %1: ] Block %2 following axis/spindle %3 generic coupling %4 required
View solution Code 9000
Handwheel %1 failed
View solution Code 9050
PROFIBUS I/O: Sign of life failur e, logical slot / I/O area address %1
View solution Code 9052
PROFIBUS I/O: Sign of life failur e, logical slot / I/O area address %1
View solution Code 10203
[Channel %1: ] NC start without reference point (action=%2<ALNX>)
View solution Code 10207
[Channel %1: ] Error when selecting or deselecting the digitize function
View solution Code 10208
[Channel %1: ] Continue program with NC start
View solution Code 10209
[Channel %1: ] Internal NC stop after block search
View solution Code 10222
[Channel %1: ] Inter-channel communication not possible
View solution Code 10223
[Channel %1: ] Command %2 is already occupied
View solution Code 10225
[Channel %1: ] command denied
View solution Code 10261
[Channel %1: ] Communication overload for block preparation
View solution Code 10299
[Channel %1: ] Auto-Repos function is not enabled
View solution Code 10600
[Channel %1: ] Block %2 auxiliary function during thread cutting active
View solution Code 10601
[Channel %1: ] Block %2 zero veloci ty at block end point during thread cutting
View solution Code 10602
[Channel %1: ] Block %2 velocity limitation during thread cutting
View solution Code 10604
[Channel %1: ] Block %2 thread pitch increase too high
View solution Code 10605
[Channel %1: ] Block %2 thread pitch decrease too high
View solution Code 10607
[Channel %1: ] Block %2 thread with frame not executable
View solution Code 10610
[Channel %1: ] Axis %2 not stopped
View solution Code 10620
[Channel %1: ] Block %3 axis %2 at software limit switch %4
View solution Code 10621
[Channel %1: ] Axis %2 rests on software limit switch %3%4
View solution Code 10630
[Channel %1: ] Block %2 axis %3 at working area limit %4
View solution Code 10631
[Channel %1: ] Axis %2 rest s at working area limit %3%4
View solution Code 10632
[Channel %1: ] Block %2 axis %3 reaches the coordinate system-specific working area limit %4
View solution Code 10633
[Channel %1: ] Axis %2 is at coordinate system-specific working area limit %3%4
View solution Code 10634
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: The tool is not oriented parallel to the axis.
View solution Code 10635
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: no milling or drilling tool.
View solution Code 10636
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: Transformation is active.
View solution Code 10637
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: Tool not active.
View solution Code 10650
[Channel %1: ] Axis %2 incorrect gantry machine data, error code %3
View solution Code 10651
[Channel %1: ] Gantry configuration error. Error code %2
View solution Code 10652
[Channel %1: ] Axis %2 gantry warning threshold exceeded
View solution Code 10653
[Channel %1: ] Axis %2 gantry error threshold exceeded
View solution Code 10654
[Channel %1: ] Waiting for synchronization start of gantry group %2
View solution Code 10655
[Channel %1: ] Synchronization of gantry group %2 in progress
View solution Code 10656
[Channel %1: ] Axis %2 gantry slave axis dynamically overloaded
View solution Code 10657
[Channel %1: ] Axis %2 power OFF in the gantry error limit exceeded status
View solution Code 10658
[Channel %1: ] Axis %2 impermissible axis status %3.
View solution Code 10700
[Channel %1: ] Block %2 NCK protection zone %3 violated during automatic or MDI mode
View solution Code 10701
[Channel %1: ] Block %2 channel-specific protection zone %3 violated during automatic or MDI mode
View solution Code 10702
[Channel %1: ] NCK protection zone %2 violated during manual mode
View solution Code 10703
[Channel %1: ] Channel-specific protection zone %2 violated during manual mode
View solution Code 10704
[Channel %1: ] Block %2 protection zone monitoring is not guaranteed
View solution Code 10706
[Channel %1: ] NCK protection zone %2 reached with axis %3 during manual mode
View solution Code 10707
[Channel %1: ] Channel-specific protection zone %2 reached with axis %3 during manual mode
View solution Code 10710
[Channel %1: ] Block %2 conflict with centerless grinding
View solution Code 10720
[Channel %1: ] Block %3 axis %2 software limit switch %4
View solution Code 10721
[Channel %1: ] Block %3 axis %2 software limit switch %4
View solution Code 10722
[Channel %1: ] Block %5 axis %2 software limit switch %6 violated, residual distance: %7 %3<ALUN> violated
View solution Code 10723
[Channel %1: ] Block %5 axis %2 software limit switch %6 violated, residual distance: %7 %3<ALUN>
View solution Code 10730
[Channel %1: ] Block %3 axis %2 working area limitation %4
View solution Code 10731
[Channel %1: ] Block %3 axis %2 working area limitation %4
View solution Code 10732
[Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>
View solution Code 10733
[Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>
View solution Code 10735
[Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>
View solution Code 10736
[Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>
View solution Code 10740
[Channel %1: ] Block %2 too many empty blocks in WAB programming
View solution Code 10741
[Channel %1: ] Block %2 directi on reversal with WAB infeed motion
View solution Code 10742
[Channel %1: ] Block %2 WAB distance invalid or not programmed
View solution Code 10743
[Channel %1: ] Block %2 WAB programmed several times
View solution Code 10744
[Channel %1: ] Block %2 no valid WAB direction defined
View solution Code 10745
[Channel %1: ] Block %2 WAB end position not clear
View solution Code 10746
[Channel %1: ] Block %2 block search stop for WAB
View solution Code 10747
[Channel %1: ] Block %2 retraction direction not defined for WAB
View solution Code 10748
[Channel %1: ] Block %2 illegal retract plane with WAB
View solution Code 10750
[Channel %1: ] Block %2 tool radius compensation activated without tool number
View solution Code 10751
[Channel %1: ] Block %2 danger of collision due to tool radius compensation
View solution Code 10752
[Channel %1: ] Block %2 overflow of local block buffer with tool radius compensation
View solution Code 10753
[Channel %1: ] Block %2 selection of the tool radius compensation only possible in linear block
View solution Code 10754
[Channel %1: ] Block %2 deselection of the tool radius compensation only possible in linear block
View solution Code 10755
[Channel %1: ] Block %2 selection of the tool radius compensation via KONT not possible at the current starting point
View solution Code 10756
[Channel %1: ] Block %2 deselection of the tool radius compensation via KONT not possible at the programmed end point
View solution Code 10757
[Channel %1: ] Block %2 changing the compensation plane while tool radius compensation is active not possible
View solution Code 10758
[Channel %1: ] Block %2 curvature radius with variable compensation value too small
View solution Code 10759
[Channel %1: ] Block %2 path is parallel to tool orientation
View solution Code 10760
[Channel %1: ] Block %2 helical axis is not parallel to tool orientation
View solution Code 10761
[Channel %1: ] Block %2 tool radius compensation for ellipse with more than one revolution not possible
View solution Code 10762
[Channel %1: ] Block %2 too many empty blocks between two traversing blocks with active tool radius compensation
View solution Code 10763
[Channel %1: ] Block %2 path component of the block in the compensation plane becomes zero
View solution Code 10764
[Channel %1: ] Block %2 discontinuous path with active tool radius compensation
View solution Code 10765
[Channel %1: ] Block %2 3D tool radius compensation not possible
View solution Code 10766
[Channel %1: ] Illegal change of surface orientation between block %2 and block %3
View solution Code 10767
[Channel %1: ] Block %2 processing with tilt angle unequal 0 not possible
View solution Code 10768
[Channel %1: ] Block %2 illegal tool orientation with 3D tool radius compensation
View solution Code 10769
[Channel %1: ] Block %2 Illegal surface normal vector with 3D tool radius compensation
View solution Code 10770
[Channel %1: ] Block %2 change of corner type due to change of orientation with active tool radius compensation
View solution Code 10771
[Channel %1: ] Block %2 overflow of local block buffer due to orientation smoothing
View solution Code 10772
[Channel %1: ] Block %2 illegal orientation change when activating or deactivating 3D face cutting
View solution Code 10773
[Channel %1: ] Illegal tool orientation in block %2 at inside corner with block %3
View solution Code 10774
[Channel %1: ] Illegal tool dimensions with face cutting in block %2
View solution Code 10775
[Channel %1: ] Illegal tool change with face cutting in block %2
View solution Code 10776
[Channel %1: ] Block%2 axis %3 must be geometry axis if tool radius compensation is active
View solution Code 10777
[Channel %1: ] Block %2 tool radius compensation: too many blocks with suppression of compensation
View solution Code 10778
[Channel %1: ] Block %2 preprocessing stop with active tool radius compensation
View solution Code 10779
[Channel %1: ] Block %2 preprocessing stop with active tool radius compensation
View solution Code 10780
[Channel %1: ] Block %2 impermissible change of a turning or grinding tool with active tool radius compensation
View solution Code 10781
[Channel %1: ] Block %2 illegal orientation of involute with tool radius compensation
View solution Code 10782
[Channel %1: ] Block %2 illegal curve type with tool radius compensation
View solution Code 10783
[Channel %1: ] Block %2 tool radius compensation type requires orientation transformation
View solution Code 10784
[Channel %1: ] Block %2 illegal tool for tool radius compensation with constraint surface
View solution Code 10790
[Channel %1: ] Block %2 plane change during linear programming with angles
View solution Code 10791
[Channel %1: ] Block %2 invalid angle during linear programming
View solution Code 10792
[Channel %1: ] Block %2 illegal interpolation type during linear programming with angles
View solution Code 10793
[Channel %1: ] Block %2 second block missing during linear programming with angles
View solution Code 10794
[Channel %1: ] Block %2 angle specification missing in 2nd block during linear interpolation with angles
View solution Code 10795
[Channel %1: ] Block %2 end point specification during angle programming contradictory
View solution Code 10800
[Channel %1: ] Block %3 axis %2 is not a geometry axis
View solution Code 10805
[Channel %1: ] Block %2 repositioning after switch of geometry axes or transformation
View solution Code 10810
[Channel %1: ] Block %2 master spindle not defined
View solution Code 10820
[Channel %1: ] Rotary axis/spindle %2 not defined
View solution Code 10860
[Channel %1: ] Block %2 feedrate not programmed
View solution Code 10861
[Channel %1: ] Block %3 velocity of positioning axis %2 is zero
View solution Code 10862
[Channel %1: ] Block %2 master spindle also used as path axis
View solution Code 10865
[Channel %1 ] Block %2 FZ active, but no tool offset, tool %3
View solution Code 10866
[Channel %1: ] Block %2 FZ is active, but the number of teeth of the active D number %4 of tool %3 is zero.
View solution Code 10870
[Channel %1: ] Block %2 facing axis for constant velocity not defined
View solution Code 10880
[Channel %1: ] Block %2 too many empty blocks between two traversing blocks when inserting chamfers or radii
View solution Code 10881
[Channel %1: ] Block %2 overflow of local block buffer in the case of chamfers or radii
View solution Code 10882
[Channel %1: ] Block %2 activation of chamfers or radii (non-modal) without traversing movement in the block
View solution Code 10883
[Channel %1: ] Block %2 chamfer or fillet has to be reduced
View solution Code 10890
[Channel %1: ] Block %2 overflow of local block buffer when calculating splines
View solution Code 10891
[Channel %1: ] Block %2 multiplicity of node is greater than its order
View solution Code 10900
[Channel %1: ] Block %2 no S value programmed for constant cutting speed
View solution Code 10910
[Channel %1: ] Block %2 irregular velocity waveform of one path axis
View solution Code 10911
[Channel %1: ] Block %2 transfo rmation prohibits to traverse the pole
View solution Code 10912
[Channel %1: ] Block %2 preprocessing and main run might not be synchronized
View solution Code 10913
[Channel %1: ] Block %2 negative feed profile is ignored
View solution Code 10914
[Channel %1: ] Block %2: movement not possible while transformation active.
View solution Code 10915
[Channel %1: ] Block %2 preparation problem in Look Ahead (module %3, identifier %4)
View solution Code 10916
[Channel %1: ] Block %2 preparation problem in Look Ahead (module %3, identifier %4)
View solution Code 10930
[Channel %1: ] Block %2 interpolation type not allowed in stock removal contour
View solution Code 10931
[Channel %1: ] Block %2 incorrect stock removal contour
View solution Code 10932
[Channel %1: ] Block %2 preparation of contour has been restarted
View solution Code 10933
[Channel %1: ] Block %2 contour programm does not contain enough contour blocks
View solution Code 10934
[Channel %1: ] Block %2 array for contour segmentation is set too small
View solution Code 10940
[Channel %1: ] Block %2 curve table %3: delete/overwrite not possible
View solution Code 10941
[Channel %1: ] Block %2: Curve table %3: NC SRAM memory full, type %4
View solution Code 10942
[Channel %1: ] Block %2 curve table %3: ille gal instruction during definition
View solution Code 10943
[Channel %1: ] Block %2 curve table %3: direction reversal of lead value in the block not allowed
View solution Code 10944
[Channel %1: ] Block %2 cur ve table %3: illegal transformation
View solution Code 10945
[Channel %1: ] Bloc k %2 curve table %3: illegal coupling of axes
View solution Code 10946
[Channel %1: ] Block %2 curve table %3: no contour defined
View solution Code 10947
[Channel %1: ] Block %2 curve table %3: contour not continuous
View solution Code 10948
[Channel %1: ] Block %2 curve table %3: position jump at end of period
View solution Code 10949
[Channel %1: ] Block %2 curve ta ble %3: missing master axis motion
View solution Code 10950
[Channel %1: ] Calculation of arc length function too inaccurate
View solution Code 10951
[Channel %1: ] Block %2 curve table %3: following value period is zero
View solution Code 10955
[Channel %1: ] Block %2 curve ta ble %3: missing master axis motion
View solution Code 10956
[Channel %1: ] Block %2 curve table %3: NC me mory limit DRAM reached type %4.
View solution Code 10958
[Channel %1: ] Lin. curve table %2, memory type %3 includes %4 polynomial segments.
View solution Code 10960
[Channel %1: ] Block %2 COMPCURV/COMPCAD and radius compensation can-notbe used simultaneously
View solution Code 10961
[Channel %1: ] Block %2 maximum cubic polynomials are allowed on active radius compensation.
View solution Code 10962
[Channel %1: ] Block %2 function %3 not possible with path correction
View solution Code 10970
[Channel %1: ] Block %2 continuous-path mode active during punching
View solution Code 10980
[Channel %1: ] Block %2 orie ntation smoothing not possible
View solution Code 10982
[Channel %1: ] Block %2 orient ation smoothing not possible with ORISON
View solution Code 12000
[Channel %1: ] Block %2 address %3 programmed repeatedly
View solution Code 12010
[Channel %1: ] Block %2 address %3 address type programmed too often
View solution Code 12020
[Channel %1: ] Block %2 illegal address modification
View solution Code 12030
[Channel %1: ] Block %2 invalid parameter or data type in %3
View solution Code 12040
[Channel %1: ] Block %2 expression %3 is not of data type 'AXIS'
View solution Code 12050
[Channel %1: ] Block %2 DIN address %3 not configured
View solution Code 12060
[Channel %1: ] Block %2 same G group programmed repeatedly
View solution Code 12070
[Channel %1: ] Block %2 too many syntax-defining G functions
View solution Code 12080
[Channel %1: ] Block %2 syntax error in text %3
View solution Code 12090
[Channel %1: ] Block %2 unexpected parameter %3
View solution Code 12100
[Channel %1: ] Block %2 number of passes %3 not permissible
View solution