Back to all Siemens models Search all database
Siemens SINUMERIK 840D CNC
Siemens SINUMERIK 840D CNC Error Codes
Complete alarm and error code reference for the Siemens SINUMERIK 840D CNC. Browse all 4014 documented fault codes below, each linking to a detailed troubleshooting guide.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Complete Alarm List (Page 3 of 21)
Code 12110
[Channel %1: ] Block %2 block syntax cannot be interpreted
View solution Code 12120
[Channel %1: ] Block %2 G function not separately programmed
View solution Code 12130
[Channel %1: ] Block %2 illegal tool orientation
View solution Code 12140
[Channel %1: ] Block %2 functionality %3 not implemented
View solution Code 12150
[Channel %1: ] Block %2 operation %3 not compatible with data type
View solution Code 12160
[Channel %1: ] Block %2 Value %3 lies beyond the value range
View solution Code 12161
[Channel %1: ] Block %2 Error on defining the limit %3
View solution Code 12162
[Channel %1: ] Block %2 Physical unit not allowed
View solution Code 12163
[Channel %1: ] Block %2 Change of access protection not allowed
View solution Code 12170
[Channel %1: ] Block %2 name %3 defined several times
View solution Code 12180
[Channel %1: ] Block %2 illegal chaining of operators %3
View solution Code 12185
[Channel %1: ] Block %2 a bit combination with %3 is not permitted
View solution Code 12190
[Channel %1: ] Block %2 variab le of type ARRAY has too many dimensions
View solution Code 12200
[Channel %1: ] Block %2 symbol %3 cannot be created
View solution Code 12205
[Channel %1: ] Block %2 area specification missing for GUD area
View solution Code 12210
[Channel %1: ] Block %2 string %3 too long
View solution Code 12220
[Channel %1: ] Block %2 binary constant %3 in string too long
View solution Code 12230
[Channel %1: ] Block %2 hexadecimal constant %3 in string too long
View solution Code 12240
[Channel %1: ] Block %2 tool orientation %3 defined repeatedly
View solution Code 12250
[Channel %1: ] Block %2 nested macro %3 not possible
View solution Code 12260
[Channel %1: ] Block %2 too many initialization values specified %3
View solution Code 12261
[Channel %1: ] Block %2 initialization of %3 not allowed
View solution Code 12270
[Channel %1: ] Block %2 macro identifier %3 already defined
View solution Code 12280
[Channel %1: ] Block %2 maximum macro length %3 exceeded
View solution Code 12290
[Channel %1: ] Block %2 arithmetic variable %3 not defined
View solution Code 12300
[Channel %1: ] Block %2 call-by-reference parameter missing on subroutine call %3
View solution Code 12310
[Channel %1: ] Block %2 axis parameter missing on procedure call %3
View solution Code 12320
[Channel %1: ] Block %2 parameter %3 is no variable
View solution Code 12330
[Channel %1: ] Block %2 ty pe of parameter %3 incorrect
View solution Code 12340
[Channel %1: ] Block %2 number of parameters too high %3
View solution Code 12350
[Channel %1: ] Block %2 parameter %3 no longer possible
View solution Code 12360
[Channel %1: ] Block %2 dimension of parameter %3 incorrect
View solution Code 12370
[Channel %1: ] Block %2 range of values %3 not permissible
View solution Code 12380
[Channel %1: ] Block %2 maximum memory capacity reached
View solution Code 12390
[Channel %1: ] Block %2 initialization value %3 cannot be converted
View solution Code 12400
[Channel %1: ] Block %2 fi eld %3 element does not exist
View solution Code 12410
[Channel %1: ] Block %2 incorrect index type for %3
View solution Code 12420
[Channel %1: ] Block %2 identifier %3 too long
View solution Code 12430
[Channel %1: ] Block %2 specified index is invalid
View solution Code 12440
[Channel %1: ] Block %2 maxi mum number of formal arguments exceeded
View solution Code 12450
[Channel %1: ] Block %2 label defined twice
View solution Code 12460
[Channel %1: ] Block %2 maximum number of symbols exceeded with %3
View solution Code 12470
[Channel %1: ] Block %2 G function %3 is unknown
View solution Code 12475
[Channel %1: ] Block %2 invalid G function number %3 programmed
View solution Code 12480
[Channel %1: ] Block %2 subroutine %3 already defined
View solution Code 12481
[Channel %1: ] Block %2 program attribute %3 not allowed
View solution Code 12490
[Channel %1: ] Block %2 access permission level %3 is not valid
View solution Code 12495
Channel %1 Block %2 Change (definition) of data class %3 is not allowed here
View solution Code 12500
[Channel %1: ] Block %2 in this module %3 is not possible
View solution Code 12510
[Channel %1: ] Block %2 too many machine data %3
View solution Code 12520
[Channel %1: ] Block %2 too many tool parameters %3
View solution Code 12530
[Channel %1: ] Block %2 invalid index for %3
View solution Code 12540
[Channel %1: ] Block %2 Block is too long or too complex
View solution Code 12550
[Channel %1: ] Block %2 name %3 not defined or option/function not activated
View solution Code 12552
[Channel %1: ] Block %2 tool/magazine OEM parameter not defined. Option not set. Option not set.
View solution Code 12553
[Channel %1: ] Block %2 name %3 option/function is not active
View solution Code 12554
[Channel %1: ] Block %2 replacement cycle %3 for the predefined procedure is missing.
View solution Code 12555
[Channel %1: ] Block %2 function not available (identification %3)
View solution Code 12556
[Channel %1: ] Block %2 name %3 Name is already known
View solution Code 12560
[Channel %1: ] Block %2 programmed value %3 exceeds allowed limits
View solution Code 12570
[Channel %1: ] Block %2 too many motion synchronous actions in %3
View solution Code 12571
[Channel %1: ] Block %2 %3 not permissible for motion synchronous action
View solution Code 12572
[Channel %1: ] Block %2 %3 only permissible for motion synchronous action
View solution Code 12573
[Channel %1: ] Block %2 motion-synchronous action: Call by reference parameters not allowed %3
View solution Code 12580
[Channel %1: ] Block %2 %3 not permissible for assignment in motion synchronous action
View solution Code 12581
[Channel %1: ] Block %2 invalid read access to %3 while in motion synchronous action
View solution Code 12582
[Channel %1: ] Block %2 field index %3 incorrect
View solution Code 12583
[Channel %1: ] Block %2 variable %3 no system variable
View solution Code 12584
[Channel %1: ] Block %2 variable %3 cannot be read synchronously with motion
View solution Code 12585
[Channel %1: ] Block %2 variable %3 cannot be changed synchronously with motion
View solution Code 12586
[Channel %1: ] Block %2 motion synchronous action: type conflict in variable %3
View solution Code 12587
[Channel %1: ] Block %2 motion synchronous action: operation/function %3 not allowed
View solution Code 12588
[Channel %1: ] Block %2 motion synchronous action: address %3 not allowed
View solution Code 12589
[Channel %1: ] Block %2 motion synchronous action: variable %3 not allowed with modal ID
View solution Code 12590
[Channel %1: ] Block %2 global user data cannot be created
View solution Code 12600
[Channel %1: ] Block %2 invalid line checksum
View solution Code 12610
[Channel %1: ] Block %2 accessi ng single character with call-by- reference parameter not possible %3
View solution Code 12620
[Channel %1: ] Block %2 accessing th is variable as single character not possible %3
View solution Code 12630
[Channel %1: ] Block %2 skip ID/label in control structure not allowed
View solution Code 12640
[Channel %1: ] Block %2 invalid nesting of control structures
View solution Code 12641
[Channel %1: ] Block %2 maximum nesting depth of control structures exceeded
View solution Code 12650
Channel %1 block %2 axis identifier %3 different in channel %4
View solution Code 12660
[Channel %1: ] Block %2 motion synchronous action: variable %3 reserved formotion synchronous actions and technology cycles
View solution Code 12661
[Channel %1: ] Block %2 technology cycle %3: no further subprogram call possible
View solution Code 12700
[Channel %1: ] Block %2 contour definition programming not allowed as modal sub-programis active
View solution Code 12701
[Channel %1: ] Block %2 illegal interpolation type for contour definition active
View solution Code 12710
[Channel %1: ] Block %2 illegal language element in external language mode
View solution Code 12720
[Channel %1: ] Block %2 program number for macro call (G65/G66) missing
View solution Code 12722
[Channel %1: ] Block %2 multiple ISO_2/3 macro or cycle calls in the block
View solution Code 12724
[Channel %1: ] Block %2 no radius programmed for cylinder interpolation acti vation/deactivation
View solution Code 12726
[Channel %1: ] Block %2 illegal plane selection with parallel axes
View solution Code 12728
[Channel %1: ] Block %2 distance for double turret not set
View solution Code 12730
[Channel %1: ] Block %2 no valid transformation machine data parameterized
View solution Code 12740
[Channel %1: ] Block %2 modal macro call %3 not possible
View solution Code 14000
[Channel %1: ] Block %2 illegal end of file
View solution Code 14001
[Channel %1: ] Block %2 illegal end of block
View solution Code 14005
[Channel %1: ] Block %2 program %3 program-specific start disable has been set
View solution Code 14006
[Channel %1: ] Block %2 invalid program name %3
View solution Code 14008
[Channel %1: ] Block %2 WRITE command writes in the temporary memory area in /_N_EXT_DIR
View solution Code 14009
[Channel %1: ] Block %2 illegal program path %3
View solution Code 14010
[Channel %1: ] Block %2 invalid default parameter in subroutine call
View solution Code 14011
[Channel %1: ] Block %2 program %3 not existing or will be edited
View solution Code 14012
[Channel %1: ] Block %2 maximum subroutine level exceeded
View solution Code 14013
[Channel %1: ] Block %2 number of subroutine passes invalid
View solution Code 14014
[Channel %1: ] Selected program %3 not available or will be edited
View solution Code 14015
[Channel %1: ] Block %2 program %3 is not enabled
View solution Code 14016
[Channel %1: ] Block %2 error when calling the subroutine via M/T function
View solution Code 14017
[Channel %1: ] Block %2 syntax error when calling the subroutine via M function
View solution Code 14018
[Channel %1: ] Block %2 parts program command %3 not executable (protection level setpoint value / actual value: %4)
View solution Code 14020
[Channel %1: ] Block %2 wrong value or wrong number of parameters on function or procedure call
View solution Code 14021
[Channel %1: ] Block %2 wrong value or wrong number of parameters on function or procedure call
View solution Code 14022
[Channel %1: ] Block %2 error on function or procedure call, error code %3
View solution Code 14025
[Channel %1: ] Block %2 motion synchronous action: illegal modal ID
View solution Code 14026
[Channel %1: ] Block %2 motion synchronous action: invalid polynomial number in the FCTDEF command
View solution Code 14027
[Channel %1: ] Block %2 motion-synchronous action: Too many technology cycles programmed.
View solution Code 14028
[Channel %1: ] Block %2 motion-s ynchronous action: Technology cycle programmed with t oo many parameters
View solution Code 14030
[Channel %1: ] Block %2 combine OSCILL and POSP during oscillation with infeedmotion
View solution Code 14033
[Channel %1: ] Block %2 involute: no end point programmed
View solution Code 14034
[Channel %1: ] Block %2 involute: angle of rotation too large
View solution Code 14035
[Channel %1: ] Block %2 involute: start point invalid
View solution Code 14036
[Channel %1: ] Block %2 involute: end point invalid
View solution Code 14037
[Channel %1: ] Block %2 involute: radius invalid
View solution Code 14038
[Channel %1: ] Block %2 involute not definable: end point error
View solution Code 14039
[Channel %1: ] Block %2 involute: end point programmed several times
View solution Code 14040
[Channel %1: ] Block %2 error in end point of circle
View solution Code 14045
[Channel %1: ] Block %2 error in tangential circle programming
View solution Code 14048
[Channel %1: ] Block %2 wrong number of revolutions in circle programming
View solution Code 14050
[Channel %1: ] Block %2 nesting depth for arithmetic operations exceeded
View solution Code 14051
[Channel %1: ] Block %2 arithmetic error in part program
View solution Code 14055
[Channel %1: ] Block %2 impermissible NC language substitution, error code %3
View solution Code 14060
[Channel %1: ] Block %2 invalid skip level with differential block skip
View solution Code 14070
[Channel %1: ] Block %2 memory for variable s not sufficient for subroutine call
View solution Code 14080
[Channel %1: ] Block %2 jump destination %3 not found
View solution Code 14082
[Channel %1: ] Block %2 label %3 program section not found
View solution Code 14085
[Channel %1: ] Block %2 instruction not allowed
View solution Code 14088
[Channel %1: ] Block %2 axis %3 doubtful position
View solution Code 14090
[Channel %1: ] Block %2 invalid D number
View solution Code 14091
[Channel %1: ] Block %2 illegal function, index %3
View solution Code 14092
[Channel %1: ] Block %2 axis %3 is wrong axis type
View solution Code 14093
[Channel %1: ] Block %2 path interval <= 0 with polynominal interpolation
View solution Code 14094
[Channel %1: ] Block %2 polynominal degree greater than 3 programmed for polynominal interpolation
View solution Code 14095
[Channel %1: ] Block %2 radius for circle programming too small
View solution Code 14096
[Channel %1: ] Block %2 illegal type conversion
View solution Code 14097
[Channel %1: ] Block %2 string cannot be converted to AXIS type
View solution Code 14098
[Channel %1: ] Block %2 conversion error: no valid number found
View solution Code 14099
[Channel %1: ] Block %2 result in string concatenation too long
View solution Code 14100
[Channel %1: ] Block %2 orientation transformation not available
View solution Code 14101
[Channel %1: ] Block %2 orientation transformation not active
View solution Code 14102
[Channel %1: ] Block %2 polynominal degree greater than 5 programmed for orientation vector angle
View solution Code 14104
[Channel %1: ] Block %2 Active transformation allows neither vector programming nor interpolation
View solution Code 14110
[Channel %1: ] Block %2 Euler angles and orientation vector components programmed
View solution Code 14111
[Channel %1: ] Block %2 Euler angles, orientation vector and transformation axes programmed
View solution Code 14112
[Channel %1: ] Block %2 programmed orientation path not possible
View solution Code 14113
[Channel %1: ] Block %2 programmed lead angle too large
View solution Code 14114
[Channel %1: ] Block %2 programmed tilt angle too large
View solution Code 14115
[Channel %1: ] Block %2 illegal definition of workpiece surface
View solution Code 14116
[Channel %1: ] Block %2 absolute orientation programmed while ORIPATH/ORIPATHS is active
View solution Code 14117
[Channel %1: ] Block %2 no angle or direction of the cone programmmed
View solution Code 14118
[Channel %1: ] Block %2 no end orientation programmed
View solution Code 14119
[Channel %1: ] Block %2 no intermediate orientation programmed
View solution Code 14120
[Channel %1: ] Block %2 plane determination for programmed orientation not possible
View solution Code 14121
[Channel %1: ] Block %2 no orientation defined (distance equals zero).
View solution Code 14122
[Channel %1: ] Block %2 angle and direction of the cone programmed
View solution Code 14123
[Channel %1: ] Block %2 nutation angle of the cone too small
View solution Code 14124
[Channel %1: ] Block %2 start tangent for orientation is zero
View solution Code 14125
[Channel %1: ] Block %2 programmed rotation is not possible
View solution Code 14126
[Channel %1: ] Block %2 ORIPATH lift factor impermissible.
View solution Code 14127
[Channel %1: ] Block %2 rotation programmed several times
View solution Code 14128
[Channel %1: ] Block %2 absolute programming of the orienting rotation with active ORIROTC.
View solution Code 14129
[Channel %1: ] Block %2 orientation angles and orientation vector components programmed
View solution Code 14130
[Channel %1: ] Block %2 too many initialization values given
View solution Code 14131
[Channel %1: ] Block %2 orientation axes and lead/tilt angles programmed
View solution Code 14132
[Channel %1: ] Block %2 orientation axes incorrectly configured
View solution Code 14133
[Channel %1: ] Block %2 G code for orientation definition not allowed
View solution Code 14134
[Channel %1: ] Block %2 G code for orientation interpolation not allowed
View solution Code 14136
[Channel %1: ] Block %2 Orientation polynomial is not permitted
View solution Code 14137
[Channel %1: ] Block %2 Polynomials PO[PHI] and PO[PSI] are not permitted
View solution Code 14138
[Channel %1: ] Block %2 Polynomials PO[XH], PO[YH] and PO[ZH] are not permitted
View solution Code 14139
[Channel %1: ] Block %2 Polynomial for angle of rotation PO[THT] is not permitted
View solution Code 14140
[Channel %1: ] Block %2 position programming without transformation not allowed
View solution Code 14144
[Channel %1: ] Block %2 PTP movement not allowed
View solution Code 14146
[Channel %1: ] Block %2 CP or PTP movement without transformation not allowed
View solution Code 14147
[Channel %1: ] Block %2 spline for orientation not possible.
View solution Code 14148
[Channel %1: ] Illegal reference system for Cartesian manual traverse
View solution Code 14150
[Channel %1: ] Block %2 illegal tool carrier number programmed or declared (MD)
View solution Code 14151
[Channel %1: ] Block %2 illegal tool carrier rotation
View solution Code 14152
[Channel %1: ] Block %2 tool carrier: invalid orientation. Error code: %3
View solution Code 14153
[Channel %1: ] Block %2 unknown tool carrier type: %3
View solution Code 14154
[Channel %1: ] Block %2 The amount of fine correction in parameter %3of the orientable toolholder %4 is too large
View solution Code 14155
[Channel %1: ] Block %2 invalid base frame definition for tool carrier offset
View solution Code 14156
[Channel %1: ] Toolholder selection error at reset
View solution Code 14157
[Channel %1: ] Block %2 illegal interpolation type with MOVT
View solution Code 14159
[Channel %1: ] Block %2 more than two angles programmed with ROTS or AROTS
View solution Code 14160
[Channel %1: ] Block %2 tool length selection without geometry axis specification
View solution Code 14162
[Channel %1: ] Block %2 error %3 on activation of the CUTMOD function
View solution Code 14165
[Channel %1: ] Block %2 selected ISO H/D number %3 does not match tool %4
View solution Code 14166
[Channel %1: ] Block %2 error %3 when programming a tool length offset with TOFF / TOFFL
View solution Code 14170
[Channel %1: ] Block %2 illegal interpolation type with tool length compensation
View solution Code 14180
[Channel %1: ] Block %2 H number %3 is not defined
View solution Code 14181
[Channel %1: ] Block %2 ISO tool offset %3 not present
View solution