Volver a todos los modelos de Siemens Search all database
Siemens SINUMERIK 840D CNC
Códigos de error de Siemens SINUMERIK 840D CNC
Referencia completa de códigos de alarma y error para Siemens SINUMERIK 840D CNC. Explore a continuación los 4014 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Lista completa de alarmas (Page 2 of 21)
Código 7201
Assertion error in %1 line %2
Ver solución Código 7202
Missing option bit for %1: %2 <hex>
Ver solución Código 7205
[Channel %1: ] Incompatible OEM transformation version NCK %2 CC %3
Ver solución Código 7300
Problem with externally linked COA application %1 Index: %2 Additional information: %3
Ver solución Código 7301
Assertion error in %1 line %2
Ver solución Código 7500
Block %1 invalid protection level for command %2 (protection level act.: %3 prog.: %4)
Ver solución Código 8000
[Channel %1: ] Option 'Interrupt routines' not set
Ver solución Código 8010
Option 'activation of more than %1 axes' not set
Ver solución Código 8020
Option 'activation of more than %1 channels' not set
Ver solución Código 8021
Option 'activation of more than %1 mode groups' not set
Ver solución Código 8022
Option 'activation of more than %1KB SRAM' not set
Ver solución Código 8023
Option 'Activation of more than %1 KB PLC user memory' not set
Ver solución Código 8024
Option 'Activation of more than %1 magazines' not set
Ver solución Código 8030
[Channel %1: ] Block %2 option 'interpolation of more than %3 axes' not set
Ver solución Código 8031
[Channel %1: ] Block %2 axis %3: Axis has no IPO functionality
Ver solución Código 8032
Option 'activation of more than %1 link axes' not set
Ver solución Código 8034
Option 'activation of axis containers' not set
Ver solución Código 8036
Option: it is not allo wed to set different IPO cycles or position control cycles with NCU link.
Ver solución Código 8037
'Activate APC/Number of curren t setpoint filters' option not set.
Ver solución Código 8038
Option 'activation of more than %1 lead link axes' not set
Ver solución Código 8040
Machine data %1 reset, corresponding option is not set
Ver solución Código 8041
Axis %1: MD %2 reset, corresponding option not sufficient
Ver solución Código 8044
Option for IPO cycle time %1 ms not set
Ver solución Código 8050
Option 'SPL inputs/outputs' not set.
Ver solución Código 8051
Option 'Handwheel on PROFIBUS' not set
Ver solución Código 8080
%1 option(s) is/are activated without setting the license key
Ver solución Código 8081
%1 option(s) is/are activated that are not licensed by the license key
Ver solución Código 8082
A wrong license key was entered three times, Power On required before next try.
Ver solución Código 8088
'Selection of non-grinding-specific tools' option not possible
Ver solución Código 8098
Invalid combination of options (%1)
Ver solución Código 8100
[Channel %1: ] Block %2: function not possible
Ver solución Código 8101
Option for collision avoidance is inadequate
Ver solución Código 8120
[Channel %1: ] Block %2 following axis/spindle %3 generic coupling %4 required
Ver solución Código 9000
Handwheel %1 failed
Ver solución Código 9050
PROFIBUS I/O: Sign of life failur e, logical slot / I/O area address %1
Ver solución Código 9052
PROFIBUS I/O: Sign of life failur e, logical slot / I/O area address %1
Ver solución Código 10203
[Channel %1: ] NC start without reference point (action=%2<ALNX>)
Ver solución Código 10207
[Channel %1: ] Error when selecting or deselecting the digitize function
Ver solución Código 10208
[Channel %1: ] Continue program with NC start
Ver solución Código 10209
[Channel %1: ] Internal NC stop after block search
Ver solución Código 10222
[Channel %1: ] Inter-channel communication not possible
Ver solución Código 10223
[Channel %1: ] Command %2 is already occupied
Ver solución Código 10225
[Channel %1: ] command denied
Ver solución Código 10261
[Channel %1: ] Communication overload for block preparation
Ver solución Código 10299
[Channel %1: ] Auto-Repos function is not enabled
Ver solución Código 10600
[Channel %1: ] Block %2 auxiliary function during thread cutting active
Ver solución Código 10601
[Channel %1: ] Block %2 zero veloci ty at block end point during thread cutting
Ver solución Código 10602
[Channel %1: ] Block %2 velocity limitation during thread cutting
Ver solución Código 10604
[Channel %1: ] Block %2 thread pitch increase too high
Ver solución Código 10605
[Channel %1: ] Block %2 thread pitch decrease too high
Ver solución Código 10607
[Channel %1: ] Block %2 thread with frame not executable
Ver solución Código 10610
[Channel %1: ] Axis %2 not stopped
Ver solución Código 10620
[Channel %1: ] Block %3 axis %2 at software limit switch %4
Ver solución Código 10621
[Channel %1: ] Axis %2 rests on software limit switch %3%4
Ver solución Código 10630
[Channel %1: ] Block %2 axis %3 at working area limit %4
Ver solución Código 10631
[Channel %1: ] Axis %2 rest s at working area limit %3%4
Ver solución Código 10632
[Channel %1: ] Block %2 axis %3 reaches the coordinate system-specific working area limit %4
Ver solución Código 10633
[Channel %1: ] Axis %2 is at coordinate system-specific working area limit %3%4
Ver solución Código 10634
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: The tool is not oriented parallel to the axis.
Ver solución Código 10635
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: no milling or drilling tool.
Ver solución Código 10636
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: Transformation is active.
Ver solución Código 10637
[Channel %1: ] Axis %2, tool radius compensation is inactive for type %3 working area limitation, reason: Tool not active.
Ver solución Código 10650
[Channel %1: ] Axis %2 incorrect gantry machine data, error code %3
Ver solución Código 10651
[Channel %1: ] Gantry configuration error. Error code %2
Ver solución Código 10652
[Channel %1: ] Axis %2 gantry warning threshold exceeded
Ver solución Código 10653
[Channel %1: ] Axis %2 gantry error threshold exceeded
Ver solución Código 10654
[Channel %1: ] Waiting for synchronization start of gantry group %2
Ver solución Código 10655
[Channel %1: ] Synchronization of gantry group %2 in progress
Ver solución Código 10656
[Channel %1: ] Axis %2 gantry slave axis dynamically overloaded
Ver solución Código 10657
[Channel %1: ] Axis %2 power OFF in the gantry error limit exceeded status
Ver solución Código 10658
[Channel %1: ] Axis %2 impermissible axis status %3.
Ver solución Código 10700
[Channel %1: ] Block %2 NCK protection zone %3 violated during automatic or MDI mode
Ver solución Código 10701
[Channel %1: ] Block %2 channel-specific protection zone %3 violated during automatic or MDI mode
Ver solución Código 10702
[Channel %1: ] NCK protection zone %2 violated during manual mode
Ver solución Código 10703
[Channel %1: ] Channel-specific protection zone %2 violated during manual mode
Ver solución Código 10704
[Channel %1: ] Block %2 protection zone monitoring is not guaranteed
Ver solución Código 10706
[Channel %1: ] NCK protection zone %2 reached with axis %3 during manual mode
Ver solución Código 10707
[Channel %1: ] Channel-specific protection zone %2 reached with axis %3 during manual mode
Ver solución Código 10710
[Channel %1: ] Block %2 conflict with centerless grinding
Ver solución Código 10720
[Channel %1: ] Block %3 axis %2 software limit switch %4
Ver solución Código 10721
[Channel %1: ] Block %3 axis %2 software limit switch %4
Ver solución Código 10722
[Channel %1: ] Block %5 axis %2 software limit switch %6 violated, residual distance: %7 %3<ALUN> violated
Ver solución Código 10723
[Channel %1: ] Block %5 axis %2 software limit switch %6 violated, residual distance: %7 %3<ALUN>
Ver solución Código 10730
[Channel %1: ] Block %3 axis %2 working area limitation %4
Ver solución Código 10731
[Channel %1: ] Block %3 axis %2 working area limitation %4
Ver solución Código 10732
[Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>
Ver solución Código 10733
[Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>
Ver solución Código 10735
[Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>
Ver solución Código 10736
[Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>
Ver solución Código 10740
[Channel %1: ] Block %2 too many empty blocks in WAB programming
Ver solución Código 10741
[Channel %1: ] Block %2 directi on reversal with WAB infeed motion
Ver solución Código 10742
[Channel %1: ] Block %2 WAB distance invalid or not programmed
Ver solución Código 10743
[Channel %1: ] Block %2 WAB programmed several times
Ver solución Código 10744
[Channel %1: ] Block %2 no valid WAB direction defined
Ver solución Código 10745
[Channel %1: ] Block %2 WAB end position not clear
Ver solución Código 10746
[Channel %1: ] Block %2 block search stop for WAB
Ver solución Código 10747
[Channel %1: ] Block %2 retraction direction not defined for WAB
Ver solución Código 10748
[Channel %1: ] Block %2 illegal retract plane with WAB
Ver solución Código 10750
[Channel %1: ] Block %2 tool radius compensation activated without tool number
Ver solución Código 10751
[Channel %1: ] Block %2 danger of collision due to tool radius compensation
Ver solución Código 10752
[Channel %1: ] Block %2 overflow of local block buffer with tool radius compensation
Ver solución Código 10753
[Channel %1: ] Block %2 selection of the tool radius compensation only possible in linear block
Ver solución Código 10754
[Channel %1: ] Block %2 deselection of the tool radius compensation only possible in linear block
Ver solución Código 10755
[Channel %1: ] Block %2 selection of the tool radius compensation via KONT not possible at the current starting point
Ver solución Código 10756
[Channel %1: ] Block %2 deselection of the tool radius compensation via KONT not possible at the programmed end point
Ver solución Código 10757
[Channel %1: ] Block %2 changing the compensation plane while tool radius compensation is active not possible
Ver solución Código 10758
[Channel %1: ] Block %2 curvature radius with variable compensation value too small
Ver solución Código 10759
[Channel %1: ] Block %2 path is parallel to tool orientation
Ver solución Código 10760
[Channel %1: ] Block %2 helical axis is not parallel to tool orientation
Ver solución Código 10761
[Channel %1: ] Block %2 tool radius compensation for ellipse with more than one revolution not possible
Ver solución Código 10762
[Channel %1: ] Block %2 too many empty blocks between two traversing blocks with active tool radius compensation
Ver solución Código 10763
[Channel %1: ] Block %2 path component of the block in the compensation plane becomes zero
Ver solución Código 10764
[Channel %1: ] Block %2 discontinuous path with active tool radius compensation
Ver solución Código 10765
[Channel %1: ] Block %2 3D tool radius compensation not possible
Ver solución Código 10766
[Channel %1: ] Illegal change of surface orientation between block %2 and block %3
Ver solución Código 10767
[Channel %1: ] Block %2 processing with tilt angle unequal 0 not possible
Ver solución Código 10768
[Channel %1: ] Block %2 illegal tool orientation with 3D tool radius compensation
Ver solución Código 10769
[Channel %1: ] Block %2 Illegal surface normal vector with 3D tool radius compensation
Ver solución Código 10770
[Channel %1: ] Block %2 change of corner type due to change of orientation with active tool radius compensation
Ver solución Código 10771
[Channel %1: ] Block %2 overflow of local block buffer due to orientation smoothing
Ver solución Código 10772
[Channel %1: ] Block %2 illegal orientation change when activating or deactivating 3D face cutting
Ver solución Código 10773
[Channel %1: ] Illegal tool orientation in block %2 at inside corner with block %3
Ver solución Código 10774
[Channel %1: ] Illegal tool dimensions with face cutting in block %2
Ver solución Código 10775
[Channel %1: ] Illegal tool change with face cutting in block %2
Ver solución Código 10776
[Channel %1: ] Block%2 axis %3 must be geometry axis if tool radius compensation is active
Ver solución Código 10777
[Channel %1: ] Block %2 tool radius compensation: too many blocks with suppression of compensation
Ver solución Código 10778
[Channel %1: ] Block %2 preprocessing stop with active tool radius compensation
Ver solución Código 10779
[Channel %1: ] Block %2 preprocessing stop with active tool radius compensation
Ver solución Código 10780
[Channel %1: ] Block %2 impermissible change of a turning or grinding tool with active tool radius compensation
Ver solución Código 10781
[Channel %1: ] Block %2 illegal orientation of involute with tool radius compensation
Ver solución Código 10782
[Channel %1: ] Block %2 illegal curve type with tool radius compensation
Ver solución Código 10783
[Channel %1: ] Block %2 tool radius compensation type requires orientation transformation
Ver solución Código 10784
[Channel %1: ] Block %2 illegal tool for tool radius compensation with constraint surface
Ver solución Código 10790
[Channel %1: ] Block %2 plane change during linear programming with angles
Ver solución Código 10791
[Channel %1: ] Block %2 invalid angle during linear programming
Ver solución Código 10792
[Channel %1: ] Block %2 illegal interpolation type during linear programming with angles
Ver solución Código 10793
[Channel %1: ] Block %2 second block missing during linear programming with angles
Ver solución Código 10794
[Channel %1: ] Block %2 angle specification missing in 2nd block during linear interpolation with angles
Ver solución Código 10795
[Channel %1: ] Block %2 end point specification during angle programming contradictory
Ver solución Código 10800
[Channel %1: ] Block %3 axis %2 is not a geometry axis
Ver solución Código 10805
[Channel %1: ] Block %2 repositioning after switch of geometry axes or transformation
Ver solución Código 10810
[Channel %1: ] Block %2 master spindle not defined
Ver solución Código 10820
[Channel %1: ] Rotary axis/spindle %2 not defined
Ver solución Código 10860
[Channel %1: ] Block %2 feedrate not programmed
Ver solución Código 10861
[Channel %1: ] Block %3 velocity of positioning axis %2 is zero
Ver solución Código 10862
[Channel %1: ] Block %2 master spindle also used as path axis
Ver solución Código 10865
[Channel %1 ] Block %2 FZ active, but no tool offset, tool %3
Ver solución Código 10866
[Channel %1: ] Block %2 FZ is active, but the number of teeth of the active D number %4 of tool %3 is zero.
Ver solución Código 10870
[Channel %1: ] Block %2 facing axis for constant velocity not defined
Ver solución Código 10880
[Channel %1: ] Block %2 too many empty blocks between two traversing blocks when inserting chamfers or radii
Ver solución Código 10881
[Channel %1: ] Block %2 overflow of local block buffer in the case of chamfers or radii
Ver solución Código 10882
[Channel %1: ] Block %2 activation of chamfers or radii (non-modal) without traversing movement in the block
Ver solución Código 10883
[Channel %1: ] Block %2 chamfer or fillet has to be reduced
Ver solución Código 10890
[Channel %1: ] Block %2 overflow of local block buffer when calculating splines
Ver solución Código 10891
[Channel %1: ] Block %2 multiplicity of node is greater than its order
Ver solución Código 10900
[Channel %1: ] Block %2 no S value programmed for constant cutting speed
Ver solución Código 10910
[Channel %1: ] Block %2 irregular velocity waveform of one path axis
Ver solución Código 10911
[Channel %1: ] Block %2 transfo rmation prohibits to traverse the pole
Ver solución Código 10912
[Channel %1: ] Block %2 preprocessing and main run might not be synchronized
Ver solución Código 10913
[Channel %1: ] Block %2 negative feed profile is ignored
Ver solución Código 10914
[Channel %1: ] Block %2: movement not possible while transformation active.
Ver solución Código 10915
[Channel %1: ] Block %2 preparation problem in Look Ahead (module %3, identifier %4)
Ver solución Código 10916
[Channel %1: ] Block %2 preparation problem in Look Ahead (module %3, identifier %4)
Ver solución Código 10930
[Channel %1: ] Block %2 interpolation type not allowed in stock removal contour
Ver solución Código 10931
[Channel %1: ] Block %2 incorrect stock removal contour
Ver solución Código 10932
[Channel %1: ] Block %2 preparation of contour has been restarted
Ver solución Código 10933
[Channel %1: ] Block %2 contour programm does not contain enough contour blocks
Ver solución Código 10934
[Channel %1: ] Block %2 array for contour segmentation is set too small
Ver solución Código 10940
[Channel %1: ] Block %2 curve table %3: delete/overwrite not possible
Ver solución Código 10941
[Channel %1: ] Block %2: Curve table %3: NC SRAM memory full, type %4
Ver solución Código 10942
[Channel %1: ] Block %2 curve table %3: ille gal instruction during definition
Ver solución Código 10943
[Channel %1: ] Block %2 curve table %3: direction reversal of lead value in the block not allowed
Ver solución Código 10944
[Channel %1: ] Block %2 cur ve table %3: illegal transformation
Ver solución Código 10945
[Channel %1: ] Bloc k %2 curve table %3: illegal coupling of axes
Ver solución Código 10946
[Channel %1: ] Block %2 curve table %3: no contour defined
Ver solución Código 10947
[Channel %1: ] Block %2 curve table %3: contour not continuous
Ver solución Código 10948
[Channel %1: ] Block %2 curve table %3: position jump at end of period
Ver solución Código 10949
[Channel %1: ] Block %2 curve ta ble %3: missing master axis motion
Ver solución Código 10950
[Channel %1: ] Calculation of arc length function too inaccurate
Ver solución Código 10951
[Channel %1: ] Block %2 curve table %3: following value period is zero
Ver solución Código 10955
[Channel %1: ] Block %2 curve ta ble %3: missing master axis motion
Ver solución Código 10956
[Channel %1: ] Block %2 curve table %3: NC me mory limit DRAM reached type %4.
Ver solución Código 10958
[Channel %1: ] Lin. curve table %2, memory type %3 includes %4 polynomial segments.
Ver solución Código 10960
[Channel %1: ] Block %2 COMPCURV/COMPCAD and radius compensation can-notbe used simultaneously
Ver solución Código 10961
[Channel %1: ] Block %2 maximum cubic polynomials are allowed on active radius compensation.
Ver solución Código 10962
[Channel %1: ] Block %2 function %3 not possible with path correction
Ver solución Código 10970
[Channel %1: ] Block %2 continuous-path mode active during punching
Ver solución Código 10980
[Channel %1: ] Block %2 orie ntation smoothing not possible
Ver solución Código 10982
[Channel %1: ] Block %2 orient ation smoothing not possible with ORISON
Ver solución Código 12000
[Channel %1: ] Block %2 address %3 programmed repeatedly
Ver solución Código 12010
[Channel %1: ] Block %2 address %3 address type programmed too often
Ver solución Código 12020
[Channel %1: ] Block %2 illegal address modification
Ver solución Código 12030
[Channel %1: ] Block %2 invalid parameter or data type in %3
Ver solución Código 12040
[Channel %1: ] Block %2 expression %3 is not of data type 'AXIS'
Ver solución Código 12050
[Channel %1: ] Block %2 DIN address %3 not configured
Ver solución Código 12060
[Channel %1: ] Block %2 same G group programmed repeatedly
Ver solución Código 12070
[Channel %1: ] Block %2 too many syntax-defining G functions
Ver solución Código 12080
[Channel %1: ] Block %2 syntax error in text %3
Ver solución Código 12090
[Channel %1: ] Block %2 unexpected parameter %3
Ver solución Código 12100
[Channel %1: ] Block %2 number of passes %3 not permissible
Ver solución