Volver a todos los modelos de Siemens Search all database
Siemens SINUMERIK 840D CNC
Códigos de error de Siemens SINUMERIK 840D CNC
Referencia completa de códigos de alarma y error para Siemens SINUMERIK 840D CNC. Explore a continuación los 4014 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Lista completa de alarmas (Page 5 of 21)
Código 16678
[Channel %1: ] Block %2 following axis/spindle %3 status %4 impermissible traversing instruction
Ver solución Código 16680
[Channel %1: ] Block %2 following axis/spindle %4 instruction %3 programmed repeatedly
Ver solución Código 16681
[Channel %1: ] Block %2 following axis/spindle %3 CPFPOS not permitted (reason %4)
Ver solución Código 16682
[Channel %1: ] Block %2 following axis/spindle %3 instructions %4 are not possible.
Ver solución Código 16684
[Channel %1: ] Block %2 following axis/spindle %3 instructions %4 are not possible separately.
Ver solución Código 16685
[Channel %1: ] Block %2 following axis/spindle %3 instructions %4 are not possible separately.
Ver solución Código 16686
[Channel %1: ] Block %2 following axis/spindle %3 type of coupling/instruction %4 is not possible.
Ver solución Código 16687
[Channel %1: ] Block %2 following axis/spindle %3 type of coupling/instruction %4 is not possible.
Ver solución Código 16688
[Channel %1: ] Block %2 following axis/spindle %3 coupling type %4 maximum number of master values exceeded
Ver solución Código 16689
[Channel %1: ] Block %2 following axis/spindle %3 coupling type %4 maximum number of master values exceeded
Ver solución Código 16690
[Channel %1: ] Block %2 following axis/spindle %3 changing the reference system %4 is not possible.
Ver solución Código 16691
[Channel %1: ] Block %2 following axis/spindle %3 changing the reference system %4 is not possible.
Ver solución Código 16692
[Channel %1: ] Block %2 following axis/spindle %3 maximum number of couplings in the block %4 has been exceeded
Ver solución Código 16694
[Channel %1: ] Block %2 following axis/spindle %3 status/instruction %4 is not possible.
Ver solución Código 16695
[Channel %1: ] Block %2 following axis/spindle %3 status/instruction %4 is not possible.
Ver solución Código 16696
[Channel %1: ] Block %2 following axis/spindle %3 coupling has not been defined.
Ver solución Código 16697
[Channel %1: ] Block %2 following axis/spindle %3 coupling has not been defined.
Ver solución Código 16698
[Channel %1: ] Block %2 following axis/spindle %3 leading axis/spindle %4 has not been defined.
Ver solución Código 16699
[Channel %1: ] Block %2 following axis/spindle %3 leading axis/spindle %4 has not been defined.
Ver solución Código 16700
[Channel %1: ] Block %2 axis %3 invalid feed type
Ver solución Código 16710
[Channel %1: ] Block %2 axis %3 master spindle not programmed
Ver solución Código 16715
[Channel %1: ] Block %2 axis %3 spindle not in standstill
Ver solución Código 16720
[Channel %1: ] Block %2 axis %3 thread pitch is zero
Ver solución Código 16730
[Channel %1: ] Block %2 axis %3 wrong parameter
Ver solución Código 16740
[Channel %1: ] Block %2 no geometry axis programmed
Ver solución Código 16746
[Channel %1: ] Block %2 spindle %3 selected gear stage %4 not installed
Ver solución Código 16747
[Channel %1: ] Block %2 spindle %3 inserted gear stage %4 for tapping not installed
Ver solución Código 16748
[Channel %1: ] Block %2 spindle %3 gear stage %4 expected
Ver solución Código 16750
[Channel %1: ] Block %2 axis %3 SPCON not programmed
Ver solución Código 16751
[Channel %1: ] Block %2 spindle/axis %3 SPCOF not executable
Ver solución Código 16755
[Channel %1: ] Block %2 no stop required
Ver solución Código 16757
[Channel %1: ] Block %2 for following spindle %3 coupling as leading spindle/axis already existing
Ver solución Código 16758
[Channel %1: ] Block %2 for leading spindle %3 coupling as following spindle/axis already existing
Ver solución Código 16760
[Channel %1: ] Block %2 axis %3 S value missing
Ver solución Código 16761
[Channel %1: ] Block %2 axis/spindle %3 not programmable in the channel
Ver solución Código 16762
[Channel %1: ] Block %2 spindle %3 thread function is active
Ver solución Código 16763
[Channel %1: ] Block %2 axis %3 programmed speed is illegal (zero or negative)
Ver solución Código 16770
[Channel %1: ] Block %2 axis %3 no measuring system available
Ver solución Código 16771
[Channel %1: ] Block %3 following axis %2 overlaid movement not enabled
Ver solución Código 16772
[Channel %1: ] Block %2 axis %3 is the slave axis, the coupling is being opened
Ver solución Código 16773
[Channel %1: ] Axis %2 is the follow ing axis. The axis/spindle disables of leading axes %3 and %4 differ from one another.
Ver solución Código 16774
[Channel %1: ] Synchronization aborted for slave axis/spindle %2
Ver solución Código 16776
[Channel %1: ] Block %2 curve table %3 does not exist for axis %4
Ver solución Código 16777
[Channel %1: ] Block %2 coupling: following axis %3 for lead axis %4 not available
Ver solución Código 16778
[Channel %1: ] Block %2 coupling: Ring coupling at following axis %3 and leading axis %4 impermissible
Ver solución Código 16779
[Channel %1: ] Block %2 coupling: too many couplings for axis %3, see active leading axis %4
Ver solución Código 16780
[Channel %1: ] Block %2 fo llowing spindle/axis missing
Ver solución Código 16781
[Channel %1: ] Block %2 m aster spindle/axis missing
Ver solución Código 16782
[Channel %1: ] Block %2 followin g spindle/axis %3 not available
Ver solución Código 16783
[Channel %1: ] Block %2 master spindle/axis %3 not available
Ver solución Código 16785
[Channel %1: ] Block %2 identical spindles/axes %3
Ver solución Código 16786
[Channel %1: ] Block %2 coupling to master spindle %3 already exists
Ver solución Código 16787
[Channel %1: ] Block %2 coupling parameter not changeable
Ver solución Código 16788
[Channel %1: ] Block %2 cyclic coupling
Ver solución Código 16789
[Channel %1: ] Block %2 multiple link
Ver solución Código 16790
[Channel %1: ] Block %2 Pa rameter is zero or missing
Ver solución Código 16791
[Channel %1: ] Block %2 parameter is not relevant
Ver solución Código 16792
[Channel %1: ] Block %2 too many couplings for axis/spindle %3
Ver solución Código 16793
[Channel %1: ] Block %2 coupling of axis %3 prohibits transformation change
Ver solución Código 16794
[Channel %1: ] Block %2 coupling of axis/spindle %3 prohibits reference point approach
Ver solución Código 16795
[Channel %1: ] Block %2 string cannot be interpreted
Ver solución Código 16796
[Channel %1: ] Block %2 coupling not defined
Ver solución Código 16797
[Channel %1: ] Block %2 coupling is active
Ver solución Código 16798
[Channel %1: ] Block %2 axis %3 is following axis and prohibits axis container rotation
Ver solución Código 16799
[Channel %1: ] Block %2 axis %3 is master axis and prohibits axis container rotation
Ver solución Código 16800
[Channel %1: ] Block %2 traverse instruction DC/CDC for axis %3 not allowed
Ver solución Código 16810
[Channel %1: ] Block %2 traverse instruction ACP for axis %3 not allowed
Ver solución Código 16820
[Channel %1: ] Block %2 traverse instruction ACN for axis %3 not allowed
Ver solución Código 16830
[Channel %1: ] Block %2 incorrect position programmed for axis/spindle %3
Ver solución Código 16903
[Channel %1: ] Program control: action %2<ALNX> not allowed in the current state
Ver solución Código 16904
[Channel %1: ] Program control: action %2<ALNX> not allowed in the current state
Ver solución Código 16905
[Channel %1: ] Program control: action %2<ALNX> not allowed
Ver solución Código 16906
[Channel %1: ] Program control: action %2<ALNX> is aborted due to an alarm
Ver solución Código 16907
[Channel %1: ] Action %2<ALNX> only possible in stop state
Ver solución Código 16908
[Channel %1: ] Action %2<ALNX> only possible in reset state or at the block end
Ver solución Código 16909
[Channel %1: ] Action %2<ALNX> not allowed in current mode
Ver solución Código 16911
[Channel %1: ] Mode change is not allowed
Ver solución Código 16912
[Channel %1: ] Program control: action %2<ALNX> only possible in reset state
Ver solución Código 16913
[Mode group %1: ] [Channel %2: ] Mode change: action %3<ALNX> not allowed
Ver solución Código 16914
[Mode group %1: ] [Channel %2: ] Mode change: action %3<ALNX> not allowed
Ver solución Código 16915
[Channel %1: ] Action %2<ALNX> not allowed in the current block
Ver solución Código 16916
[Channel %1: ] Repositioning: action %2<ALNX> not allowed in the current state
Ver solución Código 16918
[Channel %1: ] For action %2<ALNX> all channels must be in reset state
Ver solución Código 16919
[Channel %1: ] Action %2<ALNX> is not allowed due to a pending alarm
Ver solución Código 16920
[Channel %1: ] Action %2<ALNX> is already active
Ver solución Código 16921
[Mode group %2: ] [Channel %1: ] Machine data: channel/mode group assignment not allowed or assigned twice
Ver solución Código 16922
[Channel %1: ] Subprograms: acti on %2<ALNX> maximum nesting depth exceeded
Ver solución Código 16923
[Channel %1: ] Program control: action %2<ALNX> not allowed in the current state
Ver solución Código 16924
[Channel %1: ] Caution: program test modifies tool management data
Ver solución Código 16925
[Channel %1: ] Program control: action %2<ALNX> not allowed in the current state, action %3<ALNX> active
Ver solución Código 16926
[Channel %1: ] Channel coordination: action %2 not allowed in block %3, marker %4 is already set
Ver solución Código 16927
[Channel %1: ] Action %2<ALNX> at active interrupt treatment not allowed
Ver solución Código 16928
[Channel %1: ] Interrupt treatment: action %2<ALNX> not possible
Ver solución Código 16930
[Channel %1: ] Preceding block and current block %2 must be separated through an executable block
Ver solución Código 16931
[Channel %1: ] Subprograms: acti on %2<ALNX> maximum nesting depth exceeded
Ver solución Código 16932
[Channel %1: ] Conflict when activating user data type %2
Ver solución Código 16933
[Channel %1: ] Interrupt treatment: action %2<ALNX> not allowed in the current state
Ver solución Código 16934
[Channel %1: ] Interrupt treatment: action %2<ALNX> not possible due to stop
Ver solución Código 16935
[Channel %1: ] Action %2<ALNX> not possible due to search run
Ver solución Código 16936
[Channel %1: ] Action %2<ALNX> not possible due to active dry run
Ver solución Código 16937
[Channel %1: ] Action %2<ALNX> not possible due to program test
Ver solución Código 16938
[Channel %1: ] Action %2<ALNX> aborted due to active gear change
Ver solución Código 16939
[Channel %1: ] Action %2<ALNX> rejected due to active gear change
Ver solución Código 16940
[Channel %1: ] Action %2<ALNX> wait for gear change
Ver solución Código 16941
[Channel %1: ] Action %2<ALNX> rejected because no program event has been executed yet
Ver solución Código 16942
[Channel %1: ] Start program command action %2<ALNX> not possible
Ver solución Código 16943
[Channel %1: ] Action %2<A LNX> not possible due to ASUP
Ver solución Código 16944
[Channel %1: ] Action %2<ALNX> not possible due to active search blocks
Ver solución Código 16945
[Channel %1: ] Action %2<ALNX> delayed up to the block end
Ver solución Código 16946
[Channel %1: ] Start via START is not allowed
Ver solución Código 16947
[Channel %1: ] Start via PLC is not allowed
Ver solución Código 16948
Channel %1 dependent channel %2 still active
Ver solución Código 16949
Correspondence between marker of channel %1 and channel %2 is invalid.
Ver solución Código 16950
[Channel %1: ] Search run with hold block
Ver solución Código 16951
[Channel %1: ] Search run in a protected program section.
Ver solución Código 16952
[Channel %1: ] Start program command not possible due to MDI
Ver solución Código 16953
[Channel %1: ] For slave axis %2 SERUPRO not allowed, as master axis %3 not subject to axis/spindle disable
Ver solución Código 16954
[Channel %1: ] Block %2 programmed stop prohibited in stop delay area
Ver solución Código 16955
[Channel %1: ] Stop in stop delay area is delayed
Ver solución Código 16956
[Channel %1: ] Program %2 cannot be started due to global start disable.
Ver solución Código 16957
[Channel %1: ] Stop-Delay area is suppressed
Ver solución Código 16959
[Channel %1: ] Action %2<ALNX> prohibited during simulation block search.
Ver solución Código 16960
[Channel %1: ] Ac tion %2<ALNX> prohi bited during EXECUTE PROGRAM AREA.
Ver solución Código 16961
[Channel %1: ] Action %2<ALNX> prohibited during syntax check.
Ver solución Código 16962
[Channel %1: ] NCK computing time reduced, start is not allowed.
Ver solución Código 17000
[Channel %1: ] Block %2 maximum number of symbols exceeded
Ver solución Código 17001
[Channel %1: ] Block %2 no memory left for tool/magazine data
Ver solución Código 17010
[Channel %1: ] Block %2 no memory left
Ver solución Código 17018
[Channel %1: ] Block %2 incorrect value for parameter %3
Ver solución Código 17020
[Channel %1: ] Block %2 illegal array index 1
Ver solución Código 17030
[Channel %1: ] Block %2 illegal array index 2
Ver solución Código 17035
[Channel %1: ] Block %2 illegal array index 1
Ver solución Código 17040
[Channel %1: ] Block %2 illegal axis index
Ver solución Código 17050
[Channel %1: ] Block %2 illegal value
Ver solución Código 17055
[Channel %1: ] Block %2 GUD variable not existing
Ver solución Código 17060
[Channel %1: ] Block %2 requested data area too large
Ver solución Código 17070
[Channel %1: ] Block %2 data is write-protected
Ver solución Código 17080
[Channel %1: ] Block %2 %3 value below lower limit
Ver solución Código 17090
[Channel %1: ] Block %2 %3 value exceeds upper limit
Ver solución Código 17095
[Channel %1: ] Block %2 invalid value
Ver solución Código 17100
[Channel %1: ] Block %2 digital i nput/comparator no. %3 not activated
Ver solución Código 17110
[Channel %1: ] Block %2 digi tal output no. %3 not activated
Ver solución Código 17120
[Channel %1: ] Block %2 analog input no. %3 not activated
Ver solución Código 17130
[Channel %1: ] Block %2 analog output no. %3 not activated
Ver solución Código 17140
[Channel %1: ] Block %2 NCK output %3 is assigned to a function via machine data
Ver solución Código 17150
[Channel %1: ] Block %2 maximum of %3 NCK outputs programmable in the block
Ver solución Código 17160
[Channel %1: ] Block %2 no tool selected
Ver solución Código 17170
[Channel %1: ] Block %2 number of symbols too large
Ver solución Código 17180
[Channel %1: ] Block %2 illegal D number
Ver solución Código 17181
[Channel %1: ] Block %2 T no.= %3, D no.= %4 not existing
Ver solución Código 17182
[Channel %1: ] Block %2 illegal sum correction number
Ver solución Código 17183
[Channel %1: ] Block %2 H number al ready available in T no.= %3, D no.= %4
Ver solución Código 17188
[Channel %1: ] D number %2 defined in tool T no. %3 and %4
Ver solución Código 17189
[Channel %1: ] D number %2 of tools defined on magazine/location %3 and %4
Ver solución Código 17190
[Channel %1: ] Block %2 illegal T number %3
Ver solución Código 17191
[Channel %1: ] Block %2 T= %3 not existing, program %4
Ver solución Código 17192
[TO unit %1: ] Invalid tool designa tion of '%2', duplo no. %3. No more replacement tools possible in '%4'.
Ver solución Código 17193
[Channel %1: ] Block %2 the acti ve tool is no longer on toolholder no./spindle no. %3, program %4
Ver solución Código 17194
[Channel %1: ] Block %2 no suitable tool found
Ver solución Código 17195
Channel %1 block %2 illegal tool holder number %3
Ver solución Código 17200
[Channel %1: ] Block %2: Data of tool %3 cannot be deleted.
Ver solución Código 17202
[Channel %1: ] Block %2 deleting magazine data not possible
Ver solución Código 17210
[Channel %1: ] Block %2 access to variable not possible
Ver solución Código 17212
[Channel %1: ] Tool management: Load manual tool %3, duplo no. %2 onto spindle/toolholder %4
Ver solución Código 17214
[Channel %1: ] Tool management: remove manual tool %3 from spindle/toolholder %2
Ver solución Código 17216
[Channel %1: ] Remove manual tool from toolholder %4 and load manual tool %3 %2
Ver solución Código 17220
[Channel %1: ] Block %2 tool not existing
Ver solución Código 17224
[Channel %1: ] Block %2 tool T/D= %3 - tool type %4 is not permitted
Ver solución Código 17230
[Channel %1: ] Block %2 Duplo no. already assigned
Ver solución Código 17240
[Channel %1: ] Block %2 illegal tool definition
Ver solución Código 17250
[Channel %1: ] Block %2 illegal magazine definition
Ver solución Código 17260
[Channel %1: ] Block %2 illegal magazine location definition
Ver solución Código 17262
[Channel %1: ] Block %2 illegal tool adapter operation
Ver solución Código 17270
[Channel %1: ] Block %2 call-by-reference: illegal variable
Ver solución Código 17500
[Channel %1: ] Block %2 axis %3 is not an indexing axis
Ver solución Código 17501
[Channel %1: ] Block %2 indexing axis %3 with Hirth tool system is active
Ver solución Código 17502
[Channel %1: ] Block %2 indexing axis %3 with Hirth tooth system stop is delayed
Ver solución Código 17503
[Channel %1: ] Block %2 indexing axis %3 with Hirth tooth system and axis not referenced
Ver solución Código 17510
[Channel %1: ] Block %2 invalid index for indexing axis %3
Ver solución Código 17600
[Channel %1: ] Block %2 preset on transformed axis %3 not possible
Ver solución Código 17605
[Channel %1: ] Block %2 axis %3 transformation active: inhibits rotation of axis container
Ver solución Código 17610
[Channel %1: ] Block %2 axis %3 in volved in the transformation, action cannot be carried out
Ver solución Código 17620
[Channel %1: ] Block %2 approaching fixed point for transformed axis %3 not possible
Ver solución Código 17630
[Channel %1: ] Block %2 referencing for transformed axis %3 not possible
Ver solución Código 17640
[Channel %1: ] Block %2 spindle operation for transformed axis %3 not possible
Ver solución Código 17650
[Channel %1: ] Block %2 machine axis %3 not programmable
Ver solución Código 17800
[Channel %1: ] Block %2 illegally coded position programmed
Ver solución Código 17810
[Channel %1: ] Axis %2 not referenced
Ver solución Código 17811
[Channel %1: ] Fixed-point approach not possible for axis %2 in JOG, reason %3
Ver solución Código 17812
[Channel %1: ] Axis %2 fixed-point approach in JOG: Fixed point %3 changed
Ver solución Código 17813
[Channel %1: ] Axis %2 fixed-point approach in JOG and override motion active
Ver solución Código 17814
[Channel %1: ] Axis %2 fixed-point position not available
Ver solución Código 17815
Indexing axis %1 fixed point %2 unequal indexing position
Ver solución Código 17820
[Channel %1: ] JOG to position not possible for axis %2, reason %3
Ver solución Código 17821
[Channel %1: ] Axis %2 JOG to position and override motion active
Ver solución Código 17822
[Channel %1: ] Axis %2 JOG to position: Position changed
Ver solución Código 17823
[Channel %1: ] Axis %2 JOG to position deactivated
Ver solución Código 17825
Indexing axis %1 $SA_JOG_POSI TION unequal indexing position
Ver solución Código 17830
[Channel %1: ] JOG in a circle is activated, but the axis %2 required for this is not a geometry axis.
Ver solución Código 17831
[Channel %1: ] JOG a circle is not possible, reason %2
Ver solución